MSA مشرف عام
عدد المساهمات : 541 تاريخ التسجيل : 16/06/2010
| موضوع: سرفس مود - ITT الأربعاء مايو 04, 2011 4:14 pm | |
| Proc. CCU SEL04 / SEL07A login Mode 1: Press the screwdriver, the contact in the hole about the keypad and press the right button (S) Mode 2: Press the screwdriver, the contact in the hole about the keypad and press the right button (S) and re-click on the contact. Output - LOAD.
For CCU11 (• °) (C) (H) For CCU1 2 Press the screwdriver on the contact in the hole about the keypad and press the right button (S). Exit - LOAD.
M1 chassis . Salora ITT NOKIA 6390, 7190, MV4000, PL14 24101 852 SAT SOLI, 882 SAT SOLI, 885 SAT SOLI percent. CCU-SALO-07 (CCU20XX) login (C) (*) (O / V) (#) (M). output - power
Chassis EUROSTEREO-1 . DIGIVISION 63 .. 2 71 .. 2, 2, .. N6 Proc. NES3-... NES2-.. login (-/--) (MENU) (TV) - 1 sec. Output - POWER OFF.
chassis STEREO PLUS . 5575SFN, 28T7 percent. ST92T93 login (I) (M) (P) Output - TV.
Model 3875EX DIGIVISION AV7 universal remote is fully fit. Log in to the service (1-/11). (The button with a filled upper corner) (TVSAT) TV must be turned on and display any channel. Recommended starting values for regulirovki.V.AMP-027. V.LIN-038. S.COR-020. V.POS-023. H.POS-041.H.AMP-022. P.TILT-013. P.AMP-024. P.CORN-007. GREEN-032. RED-032. BLUE-032. V.BRE-005. LUM.DEL-000. AUDIO-032.OPBYT1-002. OPBYT2-064. OPBYT3-000. PRLOSK-000. RESERVE-000.Zapominat data service click E Memory 24c08. You can put a clean, including TV processor itself it will register.
ITT Model IT-3029 . Processor TOSHIBA 8827CPNG4RV8 login Set Volume = 0 hold on the TV VOL-button (square with plus sign). Displayed on the screen S. In this mode, the service mode menu, 0, 1 and 2. To enter the advanced mode is necessary in the S mode, press and release the button (square with plus) console, then press VOL-on TV and hold the button again (the box with a plus). The screen will display the symbol D. Use the AV / TV made sorting test fields-red, green, blue, black, white, black square, white cross, white cross, black mesh, white mesh, black mesh with the points, the white grid with points, two white pillars, two black column, first for 50 Hz, but for the fact the same thing for 60Hz. Click -/-- made off the field sweep. Exit - SLEEP.
| |
|