TV NOCASONIC CB3555 (14 ")Processor TDA9381PS/N3/3 CD4756 CD4002 Philips 2004.
There are all the languages and standards.
Entering the service menu: adjust the volume Vol = 0
simultaneously press the Mute on the remote and Menu key on the keyboard
of local TV. When entering the service will see on the screen:
STS 0: 01,111,010
STS 1: 01,010,001
STS 2: 11,001,001
01010111
01100101
The positions of the keys you can navigate directly select programs
0 - 9, and the buttons can be P + and P-. Changing values: Vol + and Vol-.
If the P-button to start flipping, the sequence of options:
1 - VG Option 2:
2 - option on the screen in the center of a horizontal fine line - a thread.
3 - Option BUS OPEN
4 - Parameter OP6 E1 0-FF 11,100,001
5 - Option INIT
6 - Parameter OP5 7F-FF 0 01,111,111
7 - Option OP3 FF 0-FF 11,111,111
8 - Parameter OP4 7F-FF 0 01,111,111
9 - Option OP2 CB-FF 0 11,001,011
10 - Setting SCOL 3F 0-3F 00,111,111
11 - Option OP1-FF 87 0 10,000,111
12 - Setting MCON 30 0-3F 00.11 million
13- Опция SCON 18 0-3F 00011000
14- Параметр SBRI 20 0-3F 00100000
15- Опция MBRI 39 0-3F 00111001
16- Параметр VG2B 25 0-3F 00100101
17- Опция HDOL 00 0-0F 00000000
18- Параметр AGC 01 0-03 00000001
19- Опция IFFS 03 0-07 00000011
20- Параметр TOP 1C 0-3F 00011100
21- Опция VOL 30 0-3F 00110000
22- Параметр VDFS 07 0-0F 00000111
23- Опция WPG 1F 0-3F 00011111
24- Параметр WPB 1F 0-3F 00011111
25- Опция WPR 1F 0-3F 00011111
26- Параметр RED 20 0-3F 00100000
27- Опция GRN 20 0-3F 00100000
28- Параметр 5VOF 28 0-3F 00101000
29- Опция SPEE 02 0-03 00000010
30- Параметр 5VSH 1C 0-3F 00011100
31- Опция 5VAM 18 0-3F 00011000
32- Параметр 5SCL 18 0-3F 00011000
33- Опция 5VSL 1C 0-3F 00011100 Не светится пол - экрана
34- Параметр 5LCR 1F 0-3F 00011111
35 - Option 5EWT 1F-3F 0 00,011,111
36 - Setting 5UCR 1F-3F 0 00,011,111
37 - Option 5HSR 1F-3F 0 00,011,111
38 - Setting 5EWP 1F-3F 0 00,011,111
39 - Option 5HSH 24 0-3F 00,011,111
40 - 03 Option CORE 0-03 00,000,011
41 - The 0-IF 1F-3F 0 00,011,111
If the direct selection keys work programs 0 - 9, then the screen will see:
1 - Option OP1-FF 87 0 10,000,111
2 - Option OP2 CB-FF 0 11,001,011
3 - Setting TOP 1C 0-3F 00,011,100
4 - Option IFFS 00,000,011 03 0-07
5 - Parameter VOL 30 0-3F 00.11 million
6 - Option 5SCL 18 0-3F 00,011,000
7 - Parameter VG2: OUT LOW OUT HIGH SCREEN turning green set
8 - Option 5VAM 18 0-3F 00,011,000
9 - Setting INIT
10 - STS Option 0: 01,111,010 STS 1: 01,010,001 STS 2: 11,001,001 01,010,111
Exit from service: click TV.
Sound options in OPTION 3 is: bits b7 b6 b5 b4 b3 b2 b1 b0,
and b5 - the sound of B / G (Western Europe), b6 - the sound of I (England)
b7 - the sound of M (USA), b4 - audio D / K (East Europe).
If the service to connect multiple standards,
in the menu item seems sound selection further.
Exit the service button TV / DVD.
Pictures of distances for entry into service.
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]* * *
TV Nokia Feature Stereo FS 7196, 6396, 7186, 6386, 7496, microprocessor SDA30C163, and memory.
Entering the service menu, connect the switch for TV
network. For a period not exceeding 5 seconds, consistently
push the button on the remote control MENU, then TV, then i.
Note: If after the operation - is TV mode
Standby, you must enable it by pressing the button twice and TV
enter the service mode button i. Confirmation will be the inscription: SERVICE
00 V-amp XX XX
* * *
Television 54T12 Onyx. Enter the menu service: the following is possible:
1. Set the volume equal to "0". (Necessarily)
2. push the button "MUTE" button on the remote
3. Hold the button "MUTE", put pressure on the front of the TV button "MENU".
4. in the right corner of the screen will light up the letter "D", and
glows in the corner of the left adjustable parameter and its value.
5. Page menu buttons change the "CAL"
Translation parameters is made of red and green buttons on the
blue box remote. Changing the parameters are blue and yellow buttons on a blue field.
* * *