سرفس مود - HITACHI

HITACHI C21RF80S
Chassis 3P31
Log into the service mode: In operating mode, press the remote control - «SOUND MODE» - «RECALL» - «CH 1 / 2"

HITACHI CP-2841TAN
Chassis A4
Log into the service mode: Turn off the TV network button. Hold «VOL-» on the front panel TV, including network button.

HITACHI C2575/76/77, C2975/76/77, CL25/29/76, CP25/29/76, C28300TN
Chassis A5
CPU: ST90R28
Log into the service mode: Hold the button «VOL +» and «VOL-» on the front panel power switch turn on TV, then press «ESC»
Output: POWER OFF.

HITACHI CP2893TAN, CL2995TAN, CL28500TAN
Chassis A5WK
CPU: M37270MF
Log into the service mode: Hold the button «VOL +» and «VOL-» on the front panel power switch turn on TV, then press «ESC»
Output: POWER OFF.

HITACHI
C2156TN, C2186TN, C24W1TN, C2556TN, C2586TN, C2856TN, C2886TN,
C28WD2TN, C32WD2TN, CL2156TAN, CL24W1TAN, CL2556TAN, CL2586TAN,
CL2886TAN, CL28W1TAN, CL28WD2TAN, CL32WD2TAN,
CP2156TA, CP2156TAN, CP2556TA, CP2556TAN, CP2856TA, CP2856TAN, CP2886TAN, CP28WD2TAN, CP32WD2TAN
Chassis A7
Log into the service mode:
Press
the «MENU» button on the RC, you will see the main menu. Simultaneously
press the button «VOL +» and «VOL-» on TV, and hold them until the
moment when a menu of additional items.
Output: Use
the «MENU» back to the main menu and choose the position «EXIT
SERVICE», and then confirm exit by pressing the button «VOL +» or «VOL-»

HITACHI C25/28P445VT, C21 \ 1925 \ 28P745VT, C28P405VT
Chassis M2 DIGI STEREO
CPU: CCU-SALO-09 (CCU20XX)
Log into the service mode: Click on the remote control - «P» - «*» - «O / V» - «#» - «M»
Output: «TV»
RC MAK
Log into the service mode: «SHIFT + MUTE» - «- -» - «0» - «MODE» - «SHIFT + OK»
Output: - The screen with an arrow inside (video)

HITACHI CS2840TA
Chassis EUROSTEREO 2B-F
CPU: NES3-..., NES2-...
Log into the service mode: Quickly press the remote control - «-/--» - «MENU» - «TV»
Output: POWER OFF

HITACHI CL2894/TAN/TA, CP2894/TAN/TP/AN
Chassis FEATURE STEREO
CPU: SDA30C163
Log into the service mode: Turn on the TV and the remote control key combination - «MENU» - «TV» - «I»
Output: POWER OFF

HITACHI C25/2844TN, C25/2864TN
Chassis G10
CPU: ST6385
Log into the service mode:
Hold the button «VOL +» and «VOL-» the TV, turn on the power switch,
and under the cover of the remote control to click twice on the button
".."
Output: POWER OFF

HITACHI C14-RM60-431
Chassis GA1
CPU: TDA9381PS/N2/1i1174 / IX3368CEN8
Log into the service mode: To enter the service menu to close contacts JA137 and JA138 for 1 second, and open.
Output: repeat procedure.

HITACHI CP2133TA/AN, CL2133TA/TN
Chassis STEREO PLUS
Log into the service mode: Turn on the TV and the remote control key combination - «i» - «M» - «PROG»
Output: TV

HITACHI C29-TF651S, C29-TF651SNT
Chassis T1
CPU: M37160M-V0.36, M37160M8-V0.63
Log into the service mode:
Hold
the button «FUNCTION» turn on the TV network button - will set in the
positions from 001 to 022. Down the volume to zero, the TV into standby
mode, then hold down the «TV / VIDEO» panel press «POWER» on the remote
and turn on the TV - will appear in the positions of modes from 101 to
328.
Remember this setting - the button «RECALL»
Output: POWER

HITACHI C2578FS, C2589FS, CMT2578
Chassis V1
Log into the service mode: At the front of the TV press «TV \ AV» and holding the switch on the TV. Save settings - the button «ENTER»
Output: POWER OFF

HITACHI C2045, C2186FS, C29-F100
Chassis V2
Log into the service mode: At the front of the TV press «TV \ AV» and holding the switch on the TV. Save settings - the button «ENTER»
Output: POWER OFF

HITACHI C21RM25
Chassis V3AR
CPU: TDA9381PS/N2/2I1070 HITACHI V3 TH
Log into the service mode: TV press «TV / AV» and hold enable network button.

HITACHI 43FDX, 53FDX
Log into the service mode: Open
the front cover (four screws, 2 on each side). Remove the center panel
(six screws). Press the blue button in the left corner of the board set.

Output: - Press the blue button again.

HITACHI C2126S, C2144S
Log into the service mode: In operating mode, press - MENU, 4, 7, 2, 5

HITACHI C2135MN
CPU: M37212M6-111SP
Log into the service mode: Turn on the TV while holding the button "-"
Output: POWER OFF

HITACHI CS-2115T as well as model C, CL, CP, CS Series 15, 14TE, 19 and 46
CPU: SAA5496ZP \ 035
Log into the service mode:
Turn on your TV, go for 44 program, press alternately «INFO» - «MUTE» - «TV»
The arrows on the remote control - switching and control.
If "02" in the first byte disables optional range VHF-H.
If you put "03", all the bands involved.
Hotel Mode: «VOL-»
Initializing Memory - «VOL-», three seconds later appears «DONE»
After initialization, you must re-configure channels. Entering the Setup Mode by pressing and holding down the «MENU»
Auto Store - button «INFO
Output: TV