Repair monitors EIZO
6500/ME PSU is Not working (multiple switches on and
off Turns Immediately)
D953 is defective (replace at
660I Closure of the line scan.
Q501 and S560 Are defective.
660I Sometimes Will Not Turn on Power supply and line
C1 (10 mF/35V) in the module CP SONT902 defective.
9060 Totally Not working. PSU clicks.
IC504 is defective.
9060/9070 Horizontal Frequency 20-50 kHz
these models, all regularly dry up small kondentsatory located next to the line
9070 Horizontal STK78617 module is defective.
is Possible by Replacing the Terminal Transistor BU2508AF.
If the "Side-pin"
defective Q502 and Q425
9070 No Image, the LED flashes, the signal "Mute" CN604A the plug on the 12 V.
S309 defective 10mF/35V
9070 No Images or Sometimes Appears. The Picture on the
contact in the «Sub-D» video plug
9070 line scan immediately shuts down.
S567 defective 10mF/35V
EIZO MA1660 scan and high VOLTAGE is, But no Picture.
contact with the plug keniskopa.
9080I Change the Color and Brightness.
contact at the exit videouselitele Q208, Q210, Q209, Q211, Q213, Q214
F550I Horizontal Center and the Trapeze is Not
D525 and Q510 Are faulty.
MA1660 Horizontal CO REGULATION is defective.
DIODE ZD403 is defective. (12B)
Vertos 1701 = AOC CM747 M628
ELSA GDM2040 = SONY GDM1937
14 "White Image.
defective video amplifier LM1203
1280 17 "The Closure of the field sweep.
IC203 is faulty (STV9379) Are
Replaceable by TDA8172
1280 17 "White Image.
IC3 defective CR6727A = LH2426S