أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةالتسجيلدخول
https://twitter.com/ashraf69osman--- https://www.facebook.com/ashraf.osman.73-- https://plus.google.com/u/0/+ashraf5914

شاطر | 
 

 سرفس مود - VITIAZ

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: سرفس مود - VITIAZ   الأحد مايو 08, 2011 9:59 pm

Chassis MSH-37 percent ST92195B2, video STV 2249E 37CTV - 730
Login in the technological menu can be accomplished in two ways:
- During operation momentarily close contacts
Connector 1XN1;
- In standby mode by pressing successively on the remote control buttons: "M", "OK", "Mute", "Standby".
When
you log in the technological menu the first item - "Configuration". The
following paragraphs: "Set Up TV, Set ICC", "Memory", "Password",
"Initialize" can be selected using the buttons "P +" and "P". Log in to
any submenu made by pressing the "OK" at the appropriate point.
Exit from any menu by pressing the button «ESC». The value of each menu item (sub) can be changed using "+" and "-".
To save the settings, press the "M" button on the remote.
Exit from the process menu by pressing the button «ESC».

Chassis MSH-66 37/51/54 CTV 6611, 37/51 CTV 6621, 51CTV 6711/6721, 54CTV 6641/6651/6741/6751
login - A remote control RC-5 (m / c, SAA3010, INA3010) to Conclusions 27 and 17 connect the input button in the service menu.
Saving changes: Press the "M", without leaving the submenu.
Exit - "ESC".

Chassis MSH-73 15CTV720-3, 21CTV780-3 pct: TDA9381PS/N3/1/1752, TDA9352PS/N3/2/1925, TDA9352PS/N3/2/1116
Login - In service mode in two ways:
● in the operating mode momentarily short-circuit connector XN1;
● Standby on the remote control push button sequence M, OK, OFF. ALT and standby.
Button remote control in the service mode has the following on the value:
● P + / - - move the menu items;
● + / - and OK - the choice of parameters;
● AV - Exit the submenu;
● ESC or AV - output the service mode. .

Chassis MSH-90 51/54CTV-6722 51/54CTV-6622-2 51/54CTV-6622-2M Proc. SDA5521 A003 RC7-2.
login - The button "I" - input / output to the service.
output - TV

Chassis MIN-93S 54 CTV 6643-2T prots.TDA9351PS/N2/1I0981
login
- Close the control points XN1 the processor or from Dej. mode press
the remote control (DISPL) (MENU) (MUTE) (POWER ON) return on the menu
button AV.
output - TV

model 51/54CTV-6722 percent. 555XFL
Login - Close contact XN1 about the processor.
Log in to universal remote MAK 2002 maxi, code 1310 teletekstovaya button (i)
M button remote Knight corresponds to a button DISPL RC-5
OK button remote Knight corresponds to a button SEL PIC RC-5
The voltage from the power supply is regulated SERV Techno menu> Set Up TV> Settings> +110 v

Model 37/51/54 CTV 6623-2 Proc. TDA938IPS/H2/LI.0980
login - When in standby mode, press the button on the series: (M) (OK) (MUTE) (POWER ON).
output - TV

model 63 CTV 6341 Europe
Login in standby mode, [M] (2 sec) [OK] (2 seconds) [MUTE] (2 seconds) [Power OFF]




_________________

الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - VITIAZ   الأحد مايو 08, 2011 10:00 pm

VITYAZ 37/51/54 CTV 6612/6622
Translation of the TV in service mode can be implemented in two ways:
the TV to standby mode, press the AV button on the front panel and hold it, turn on the TV;
on the TV briefly short the connector XN1.

VITYAZ
37CTV710-1 (T), 37CTV720-1 (T), 37CTV730-1 (T), 37CTV740-1 (TS),
51CTV710-1 (T), 51CTV720-1 (T), 54CTV710-1 (T), 54CTV720-1 (TS),
54CTV730-1 (TS), 54CTV740-1 (TS), 54CTV750-1 (TS), 63CTV710-1 (TS),
63CTV711-1 (TS), 70CTV710-1 (TS), 70CTV711 -1 (TS) (chassis MSH-71)

Log into the service mode in two ways:
● in the operating mode momentarily short-circuit connector XN1 (Fig. 1, next to Pin 7 D101);
● Standby on the remote control push button sequence M, OK, OFF. ALT and standby.
Button remote control in the service mode has the following on the value:
● P + / - - move the menu items;
● + / - and OK - the choice of parameters;
● AV - Exit the submenu;
● ESC or AV - Exit the service mode.

VITYAZ 51/54CTVF6722 (chassis-MSHF90)
Processor: SDA555XFL
1.Zamykayut contact service connector XN1 (located next to the microcontroller).
2. Nonoperating islyuchayut AV button on the front panel and hold it, turn on the TV network button.
Moving through the menu - by pressing the P + / -, select the item - by using the OK button, adjust settings - buttons VOL + / -
Yield: Off. TV Network button

VITYAZ 54 CTV 6643F2T (chassis MSHF93S)
Processor: TDA9351PS/N2/1I0981
1. In operating mode, momentarily short the service connector XN1 (located next to the microcontroller).
2.
Standby TV on the remote control has consistently pressed the button
DISPL, MENU, MUTE and POWER Then comes technology menu with the
following items: GEOMETRY SETTINGS, OPTIONS, TUNER, reset.
Moving
through the menu - by pressing the P + / -, select the item - by using
the OK button, adjust settings - buttons VOL + / -. To exit from any
menu button is pressed AV.
All values ​​are stored automatically when you exit those. Menu

_________________

الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
سرفس مود - VITIAZ
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: