سرفس مود - TELEFUNKEN

chassis 619A, 619A-2
login - Hold down the (SOUND) on the remote control to include a network switch. Hold about 10 seconds. Proc. CCU3000
exit - Keep the button (SOUND MUTE) on the remote control

Chassis 618
login - Press button (P) (VOL) and turn the power switch. Hold the button to display the SS on the indicator. Proc. HD404018
Output - POWER OFF

Chassis IDC2.2.01 , pct.: CCU3000 + EPROM.
TVs are based on a set series of DIGIT 2000. All adjustments are made in service mode with
using a standard remote control and keypad buttons of the local bar.
1) Switch the TV into standby mode.
2) Turn off the TV using a network switch.
3) Turn on the TV network switch while pressing the red button remote control (the button must be held
down to the timing of green light-emitting diode).
Log in to the service mode is not available if the SCART connector is present switching voltage (> 0,9 V).
You should turn off any external devices, especially the output 8 SCART.