أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةالتسجيلدخول
https://twitter.com/ashraf69osman--- https://www.facebook.com/ashraf.osman.73-- https://plus.google.com/u/0/+ashraf5914

شاطر | 
 

 سرفس مود - SONY

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: سرفس مود - SONY   السبت مايو 07, 2011 1:37 am

chassis AA-2U KV-38FS17
login - Turn the TV into standby mode, press the button on the remote control: DISPLAY, 5, VOL +, POWER ON.

chassis AA-2W, AG3, AG3E KV-29FV16A
login - Turn the TV into standby mode, press the button on the remote control: DISPLAY, 5, VOL +, POWER ON.

chassis AE-2, AE-2A, AE-2B, AP-2, AE-2F AE-3 Processor-SDA30C162, SDA30C164
login
- Switch on the TV while pressing the P + P on the front panel. After
that, the display will show a message TT_. Next, press the MENU
output - POWER OFF

chassis AE-4, GE-1 Processor-SDA30C164
login - Hold down both the PROG + and PROG-in front of the TV, turn on power switch
output - POWER OFF

chassis AE-2F Processor-SDA30C162GEG
login - Press 2 times the POWER button on the remote control

Chassis AG3 Sony KV-ES29M61, ES29N90, ES34K90 c remotes RM916, RM-959
login - Switch the TV into standby mode and continuously press DISPLAY, 5, VOL +, POWER ON.
Choosing
options menu by pressing buttons 1 and 4 on the remote, press the
MUTING, a message appears WRITE (challenge mode WRITE), then to write to
memory - button 0

Chassis G3F Sony KV-K29CF1 remote RM-845P
login - Switch the TV into standby mode and continuously press DISPLAY, 5, VOL +, POWER ON.
Choosing
options menu by pressing buttons 1 and 4 on the remote, press the
MUTING, a message appears WRITE (challenge mode WRITE), then to write to
memory - button 0

Chassis BE4, BE4A, BE-CALL, BE-3D, BE-AP, G1, BE-5, FE-1
Processor-SHR85340A, SAA5290, SDA5250
login - Turn the TV into standby mode, press the button on the remote control: DISP, 5, VOL +, TV
output - POWER OFF

Chassis BG1S, BG2S
login - Set the TV to standby mode and continuously press DISPLAY, 5, VOL +, POWER ON ..

Chassis FE-2
login
- Turn on the TV power switch and convert it into standby mode
(Stand-by) using the remote control. Then successively press the
following buttons on the remote control: (i +) (5) (Volume +) (TV).
In
the upper right corner of the screen will show "TT". Then press the
MENU button on the remote. To select the desired menu item, use the UP
and DOWN RC, and to enter the corresponding item - click RIGHT and
ENTER.
output - MENU on the RCU.
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:21 am

SONY
SHIVAKI 11AK19 CHASSIS
. To enter service mode
you must do the following manipulation. Initially, the installation menu
login button INSTALL, then press down on the remote control buttons in the sequence
following 4, 7, 2 and 5. Find the position in the ADJUST menu (all control over it change).
MODE SERVICE.
Should have in mind that many of the TV signal settings
defined by the I2C bus in service mode. Let us consider in more detail in
potentials of the chip when it paired with the controllers SDA5223-A004 (2802 Russified).
* * *
Table 1
Typical values ​​and purpose of adjustments for STV-2026 - STV-2802
Setting the standard adjustment Appointments
appointment
adjustment
00 ADJUST Adjust the white balance R 36
01 ADJUST Adjust the white balance 36 G
ADJUST 02 Adjusting White Balance 36 B
ADJUST Adjust the AGC 03 17
ADJUST 04 Set the upper frequency boundary IFA 75
ADJUST 05 Setting the lower frequency boundary IFA 57

06 ADJUST Adjust the brightness delay PAL (for 8844) 15
07 ADJUST Adjust the brightness delay SECAM (for 8844) 15
08 ADJUST Adjust the brightness delay NTSC (for 8844) 13
09 ADJUST Adjust the brightness of other delay systems (8844) 15
ADJUST 10 Vertical zoom (only for CRT 110 °) 28
ADJUST 11 vertical linearity (only for CRT 110 °) 30
ADJUST 12 centering on the horizontal (4:3) 32
ADJUST 13 vertical bevel (4:3) 33
ADJUST 14 Size by Vertical (4:3) 58
ADJUST 15 Keystone Correction S-shaped (4:3) 10
ADJUST 16 Vertical Alignment (4:3) 42
17 ADJUST Adjust the width of the image (4:3, only for CRT
110°) 52
ADJUST 18 Removal of the parabola horizontally (4:3, only for CRT
110°) 34
ADJUST 19 Removal of the parabola angle (4:3, only to CRT 110 °) 31
ADJUST 20 Removal of the trapezoid (4:3, only to CRT 110 °) .06
ADJUST 21 Horizontal Alignment (16:9) 24
ADJUST 22 vertical bevel (16:9) 11
ADJUST 23 Vertical Size (16:9) .04ADJUST 24 Correction of S-shaped distortion (16:9) .05
ADJUST 25 Vertical Alignment (16:9) 25
ADJUST Adjust the width of the 26 images (16:9 aspect ratio, only
CRT 110 °) 63
ADJUST 27 Removal of the horizontal parabola (16:9 aspect ratio, only
CRT 110 °) 19
ADJUST 28 Removal of the parabola angle (16:9 aspect ratio, a CRT 110 °) 43
ADJUST 29 Removal of the trapezoid (16:9 aspect ratio, a CRT 110 °) 31
Note. The table provided average values ​​of adjustments. For
specific unit, they may differ in one direction or another.
* * *
SDA5255-A021
(Russified version), SDA5255-A045 (version
Russification of a four teletext).
To enter the service mode menu to get into the installation (setup)
and to put pressure on a button on the remote control panel in the proper
sequence: 4-7-2-5. From the menu, the service has two parts:
• adjust the service;
• installation service.
SERVICE REGULATIONS.
Adjustment mode service connects the first line choice of menu service.
Selecting one of the 29 adjustment is made buttons "down" or "up" on
panel, and modifying the parameters adjustment is done with selected
Use the "left" or "right." On-screen digital value of this adjustment is played.
Table 1 shows typical values ​​and purpose of adjustments for a series of devices STV-2026 - STV-2802.
INSTALLATION SERVICE.
Setting mode service connects the choice of second-line service menu.
The election is being implemented Room Setup button "down" or "up" on the remote control
either the front panel of the TV. Every option is an 8-bit word
in binary code. Preference bits you need to make with the buttons "right"
or "left" Remote Control (TV). Bit value is determined by the elected
by pressure button "O" or "1" on the remote.
Below are the functional units of service designation. Status bits
Missed indifferent to data models. Appointment options ... OPTION OPTION 11 18 unfamiliar.
OPTION 00: B7 ... B0
B4 = 0 (for these models)
EOI B2 - a condition not care
B0 = 0 - OX pulses at 50 Hz and 60 Hz are adapted
B0 = 1 - OX pulses at 50 Hz only adapted
OPTION 06: B7 ... B0
B6 = 1 - Enable protection for the unfolding of human resources (outputs RGB locked)
OT - connecting PAL / NTSC
OT = 0 - included both PAL and NTSC decoder
B3 = 1 - enabled only PAL decoder
B0 = 1 - PLL enabled
OPTION 08: B7 ... B0
B7 - choice of format
B7 = 0 - 16:9
B7 = 1 - 4:3
B5 - a choice in the system D / K IF
B5 = 0 - 38 MHz
B5 = 1 - 38.9 MHz
B4 - the choice of drive system I
B4 = 0 - 39.5 MHz
B4 = 1 - 38.9 MHz
B0 = 1 - OFF function change of tone color
OPTION 09: B7 ... B0 - inclusion of standards of sound, at B = 0 is not supported by standard
B7 - connecting NTSC M
B6 - connecting PAL N
B5 - connecting PAL M
B4 - Connect K1
OT - connecting L
B2 - B1 I connect - connect D / K
BO - connecting B / G
OPTION 10: B7 ... B0
... B6 B5 - Teletext election
B4 = 0 - to connect the filter combination
B3 = 1 S-VHS input is connected
B2 = 1 - AV3 connected
B1 = 1 - AV2 connected
B0 = 1 - AV1 connected
Table 2 lists the suggested values ​​of options for the series of devices STV-2026 - STV-2802.
Table 2. the suggested values ​​of options Shivaki STV-2026 - STV-2802

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

* * *



عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 5:55 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:27 am

SHIVAKI STV1415 11AK20 CHASSIS
To enter the service
necessary in the course of 4 seconds, the login process to implement. Necessary to press the remote control the following
keys in sequence. (VOL-), (Prog), (-), (TV). The parameters chosen
buttons (PROGRAM DOWN) (PROGRAM UP), and change (VOL +), (VOL-). For
Memory push the button red. To exit, click consume TV.
* * *
SHIVAKI
STV model 2110, STV 1414 / 1 (chassis DY321DY300,).
Mode service is activated SVC control button console. In the Service
AGC adjustment is made, white balance, the amount of horizontal and vertical
subyarkosti adjustment. Click on the brightness is adjustable. 7 button scanning
Personnel disabled. 9 button white balance is adjusted for size
horizontally and vertically. In the service range of the adjusting parameter
concrete is being implemented with the buttons PR (-) and PR (+), and adjustment
preferred by the - by pressing VOL (-) and VOL (+) control panel.
To exit the service push button on the SVC or unplug the device.
* * *
SHIVAKI STV2905, DY-900 1CHASSIS
. Push down on the SERVICE
button control panel. 2). In this case the image will appear OSD (onscreen display)
"Line SVC". After that, push the button -/-- control. 3). At this time, committed
download these programs recorded in the memory of the microcomputer. 4).
loaded data is represented as follows:
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

5). Color programs recorded on the OSD - green. 6). To view
programs written in the memory, push the button PR +, -.
Adjust V-SIZE (Vertical size) 1). To receive the table
RETMA test press on PR +, - button. 2). To perform the adjustmentpush the button "6" remote control, and the picture seems OSD "STV VAMP32". 3).
Pressing on the button VOL +, - size
adjust vertically. Other adjustments are similar.
* * *


عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 5:57 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:29 am

SHIVAKI STV-101 HOTEL MODE
UP TDA9381PS/N2/3I1300, 4 pages LPLUS9381-01
On the panel must be a key entry into service - SVC -, well and further
I look for in service Mode!
Anatomiruy panel required on the left button on the bottom row. Difficult to understand just
fall as customers in the service without revealing anything.
* * *
SHIVAKI STV-2038
M4, video - LA 76810A, LC863332A,
To enter service in the remote home button solder between 2 and 16 ends
ms. We press the button the 1st time - on the screen: FACTORY; we press the 2 nd time - on the screen
B / W ADJUST (control regimes CRT), we press third time - ADJUST (geometry)
then click on PDE - ZOOM - installation options.
* * *
TV SHIVAKI STV-2122 multi,
CPU
LC863320A-5N17, memory EEPROM 24C04, video LA76810,
sound IC LA7642N, remote control STV-2122 multi (IC M61340-20).
Trouble is the same: "... the microprocessor LC863320A,
fault - from the DR is not included. Defective 24C04 EEPROM.
When changing to a clean, including a TV, and appeared to
screen saver content follows a boy with a fish on
hands (or the same manufacturer's logo is derived from 12 characters) ... "
Splash in the OPTION removed, the line CUSTOM LOGO - 0, moved to - 1
Entering the service menu come: MENU, once MENU,
then Q. VIEW, and finally MUTE. Page Navigation menu - SLEEP. Exit from service - MENU.
* * *
TV SHIVAKI STV-1585 - (8851CPNG6EG1),
Setup options for the remote and tuner. Chassis - PAEX0048E,
CPU - 8851CPNG6EG1 VER, UPS - Transistor, Tuner - ET-5V1E-CV200K, IC CD - LA78040.
From memory, net tv normally starts. Options, geometry and color
I'm with a remote control TV-29B24 rules the TV model POLAR
entering the service: "volume," together with "DISPLAY", then "DISPLAY", "-volume" and "DISPLAY" = mode D.
The processor initializes the memory clean by this board into default. Options are set CUSL 0Eh, CUSH 0Eh. Search rom
with other devices on the processor failed to find options
Remote control RC-native 815. This option CUSL 08, CUSH F7.
The tuner is analog, I have the menu with the search tv bought in frequency,
and, the option of putting in MOD2 1E, and the menu appears with line search and found the channels.
Secam SECD option included - at a value of less than 1A at SECAM
weak reception is stable, according to the table of alex3, consults 08.
* * *
For STV-2937
Entering the service has to be this:
There are three modes of service: D, S, M.
D-mode - extended service;
S-mode - a service;
M-mode - training + accelerated.
Log in S-mode service adjustment (SERVICE MODE) with an ordinary remote control:
operating mode of the device and hold pressure on the front panel
button VOL-(volume in the lowest position), push the DISPLAY button to
Remote control. In the upper left corner of the screen apparatus occurs symbol S, denotes
the inclusion of a special regime of service regulation.
When pressed on the remote control buttons on the screen -/-- Frame Scan disappears.
From the emission of a horizontal narrow band accelerating voltage can be adjusted.
Values ​​of the functions controlled automatically stored in memory.
Log in modes of service D, M is likely only with a special remote control service.
* * *



عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 5:59 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:31 am

And for SHIVAKI STV-2965
Entry into service is.
1. Put the volume on the TV that is equal to "O" (certainly).
2. Hold the button "Vol -" on the machine, push "DISP" button on the remote.
3. On the screen in the upper right corner will light up the letter "S", and in the corner left
adjustable parameter will be highlighted and its value.
Switching between the buttons done, "P" and "R +" modification
settings - buttons «Vol-» and «Vol +», as in the apparatus and the remote control.
Exit from a menu of service and saving the changes click "Stand-by" button on the remote in the parameters.
* * *
TV SHIVAKY STV-2175,
memory 24C16, percent. 8821CPNG4RJ1, frame. STV9302A, BP Tbip + discrimination.,
ULF LA4266, TDKS BSC25-N0802ER, PC discrimination., Tuner UVC68K9VCK, remote RC-820.
Lost during image viewing, OSD and sound - there.
In the AV all is well. Processor was dead - to see, tipovuha.
Replaced 8821CPNG5CR2. Earned all at once except buttons
Ch + - on the face and remote. Apparently some bytes in the firmware
change is necessary. Cured by pouring ERISSON 1401-2 firmware.
Entering the service menu: Volume set to zero,
then the panel on volume - and simultaneously display (panel).
Adjust the vertical size - parameter HIT
* * *
TV SHIVAKI STV-2038 M4,
CPU LC863332A video - LA 76810A.
Log into the service menu in the remote home button solder between
2 and 16 feet ms. Click a button the first time - on the screen: FACTORY;
press a second time - on the screen B / W ADJUST (control regimes
tube), the third time - ADJUST (geometry), then a button on the remote - ZOOM - installation options.
* * *
TV SHIVAKI STV-20L1,
control processor TDA15063H/N1B00.
Enter the service mode: remove the volume on 0.Sinhronno MUTE push button on the TV + MEHU.
* * *
TV SINGER,
SELECO FORMENTI
manufacturing, chassis FPC 2002.2, Processor TDA 9350PS/N2/2/0771 CB 6003 K2K297 Swing 01.2.
Entering the service menu: disp (on TV) + power (on the remote).
the first option, all standards are set, but SECAM
not really. DK IF filter with a change in the options I put 03 (PAL DK PAL BG) and transcoder.
* * *
Skyworth TV model: 32L98SW.
8M10 chassis. Processor - MST9U19AL-LF, FLASH - 25X40VNI, DDR - NT5DS8M16FS-5 memory - 24C64AN, sound - TDA2616.
Enter the service mode:
1.Ubratgromkost panel to zero, holding it, press the button on the display.
2.peredvizhenie the pages click Menu.
3.pri pressing on the "serpent" (round arrow) in the output AGING MODE.
* * *
TV Sitronics STV2132f and Avesta 54TTS-03
CPU HISENSE 8821CPNG4UD4
Entering the service menu:
1.nabiraetsya 30 channel
2. recruited 88 channel
3. volume set at minimum
4. Turns mute. We go to the M pattern
* * *



عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 6:02 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:34 am

TV SKARLETT SC-TV2104,
m-PROC ST92T195D7B1 M224F0204, EEPROM 24C08, TRANSFORMER BCK-4079WH,
POWER STR-G6653, HOT ST1803DHI, v-PROC STV2248C, FBT JF0501-19 242,
TUNER EWT-5V3K2-E46W (analog: AGC, VT, U, H, L, M, .. If), V. DEFLECTION TDA8174A
Log into the service menu: - hidden button on the remote control (the third under POWER)
* * *
FALCON 51.37, 54 TTS6151, 6150, 6155
. Z9023306PSC CPU.
Entry into service: The TV is connected to the control pressure (DISP) (FUZZU) (TIMMER)
* * *
FALCON 54TTS6100
. Entry into service: On the TV is turned
pressure from the control (DISPLAY) (MUTE) (SLEEP) (FUZZU)
* * *
TV Sony,
LC863532B-54R6 + LA76810A. Remote Remote Control - 52H8.
Warning: ENG.OPTION set equal to 1, because at the value
0 - 00 ... only sections 03 and if you specify 1, all sections 00 ... 15 are opened.
Options similar to the corresponding options LC863532C-55R9.
Paging menu - Vol + and Vol-.
Pressing Mute on the remote control (speaker crossed) - Off Vertical.
* * *
SERVICE S O NY
* * *
Diagnosis and treatment service chassis SONY BE-3B.
Diagnosis and repair of modern TV with I2C bus is not possible
with little or no knowledge of the error codes, modes of service and fault
model. The information in this article, information can quickly and efficiently
find and eliminate defects inherent to the model Sony KV-M2540 (41) K with the chassis BE-3B.
Program self-BE 3.
Transferred to the identification of errors by BE-3 to befall one of two ways:
1. Bus is busy.
2. The device responds to the command is incorrect.
In the case of one of these situations, the program will try
First, the bus free if it is busy (in case of failure will be
informed about the continuous blinking LED indicator), and then
Contact every device to be relevant to monitor the them to defect. If the defective unit is found, its number will be shown a series of flashes Side
(See Table transcript. 5), thus declaring non-fatal error.
If you found a bug fatal, the receiver is able to simply remain,
where was he when the error is befallen, if not a fatal error, the receiver will try to continue the work.
Table 5
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

Recommendations for repair.
These tips only for those vehicles needed in the scheme which has not been entered yet
provided by the change.
* * *
Apparatus model KV-M2541K and KV-M2540K.
Symptom: No screen, high-voltage and audio device in the mode of "Stand-by" is.
Reason: Injury bit reset chip IC002pamyati, the board A, ST24C16CM1-TR / A (9 - 759-277-89).
Solution: First of all, should try to restart the procedure
memory chips without changing it. The need for this jumper to put on A board - pin 9 CN001-7 connector to ground (slant board Across Pin 1, 9 - upper range). 2
WARNING!
Installation of the jumper removes protection! Then be
connect the following sequence of commands from the remote service:
[5], [-/--], [5], [9], [T] [T], [4], [9]
In applying the usual procedure of the remote command as follows:
[5], [-/--], [5], [9], [Stand-by], [Display on screen], [5], [Volume +], [TV], [4], [9] .
Then turn off the TV button on the panel front, wait until
LED goes out, and reconnect the TV. After a few seconds
image must appear. Remove the jumper on the motherboard A, setting
geometry to make, if necessary - the white balance. Then, in the mode
make test command 27 (Destination = K). If after 2-3 attempts failed to reach
the appearance of images, replace the memory chip, and make the necessary
adjustment. To avoid damage to the repeated data memory to Mc
appropriate to make changes on the board of A (see Figure 7):
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
Fig.7
1. Put the resistor R304 and transistor Q305.
2. Remove capacitor C30.
3. Trim Track 5B - 8 Pin MS002 Q305: 2SC2412K-T-146, p / n 8-729-907-23
or p / n 1-247-855-JC-91libo 501-1, p / n 8-729-907-23 R304: 10K, 0,1 W, p / n 1-247-855-81.
These changes in the design of television sets made at the start of the head. №
4046344 (KV-M2540K) and number 40,003,101 (KV-M2541K).
In the event of a similar re-defect in the transformed unit must have:
1. Change memory chip IC002: p / n 8-759-277-89.
2. Put the CPU version later IC001: p / n 8-752-862-91 / 3.
Symptom may experience symptoms vary:
• no text: the importance of "FAST BLK" in the menu service must be 01 Instead of the 00.
• jumping picture: the importance of "INTERLACE" in the menu service must be 00 Instead of the 01
• Geometric distortion: change vertical size, etc.
• recorded in standby mode "Stand-by".
Reason: typing errors, associated with a menu replacement program ("programme exchange").
Solution: Change the on-board a chip in accordance with Table 6.
Table 6
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

Symptom: when viewing dark scenes images from the video input or tuner through
at the top of the screen is distinguishable uniform illumination, the
brightness which gradually decreases toward the center of the screen.
The reason: the passage of low-frequency components of the video incomplete
due to lack of resistor R345 (under illumination with a video-image)
or R323 (the illumination when taking pictures with a tuner).
Solution: put a resistor missing - METAL GLASE 47K 5% 0.1W (1-216-089-00)
Symptom: when viewing dark scenes images from the video input or through
tuner at the top of the screen noticeable brightening of a spot light.
The reason: a reflection of the pulse measurement circuits balance automatically
white on the inside surface of the tube.
The solution: to reach the reflection more evenly through the small
changes. After adjustment, check the absence of reflection
when a signal is SECAM systems the black field through an antenna and low-frequency inputs, as well as the absence of a signal.
* * *



عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 6:07 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:37 am

SONY CHASSIS AE-2F KV-S2942U, KV-S2941A \ B \ D \ K, KV-S2943E RM-831
:
Connect the TV's power, and then double-click on the button on the remote control ON.
In the upper right corner of the display will appear the TT, then push the button MENU.
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

* * *
SONY CHASSIS AE-3 KV-S2951 KR
. Use the remote type RM-831.
Plug the device, simultaneously crushing - and + buttons on the front panel of the TV.
* * *
SONY KR-S4613 CHASSIS AP-2
: Use a remote control type RM-832.
Plug the TV at the same time, any 2 button pressing
front panel of the TV.
* * *
CHASSIS BE-3B
. In early 1999, all service centers
Russia got the information from the main office of the firm's disclosure of a defect in the
model KV-M2541K and KV-M2540K and methods of eliminating it. Starting with the numbers
Factory 4046344 (KV-M2540K) and 4,000,310 (KV-M2541K), in the design
apparatus changes are made, on any below to tell.
The defect is detected in the absence of a raster-voltage and high sound.
The unit is constantly in standby mode is (STAND-BY).
The cause of the defect found itself damaged bits reset chip IC002
A memory card - ST24C16CM1TR / A (9-759-277-89).
In order to eliminate the defect must first try to restart a memory chip without changing it.
To do this, put a jumper on the board of the printed conductors:
CN001 connector pin 9 is connected with a wire common (when placing boards
Cut an angle up contact in the second row is located, counting from the bottom ranks
top, and contacts from left to right). Then, using the remote control, convey a combination of
commands, pressing buttons in the sequence shown in Fig. 1.
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

After that, turn off the TV button on its front panel, and wait,
when the LED zamolknet. Then include the TV. A few
seconds required to receive the image. If this happens, it is necessary for
unit is turned off and remove the jumper, turn it back on, adjust
raster geometry and white balance. Then in a test mode command is fed CT 27.
If after two or three attempts fails to achieve the appearance of images
change will have a memory chip IC002.
In order to avoid a secondary defect, and the probable failure of the chip
bring the machine to change the scheme in Fig. 7, where the line of fat
are mounted all over again the details, but the crosses are removed and wiped out the connection.
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
To make modifications in the correction of the raster, the white balance and other
parameters of the model data sets included in the service menu and operate in
him to take appropriate steps:
1. TV included.
2. In MENU included, commands from the remote suppressed by pressure buttons in the sequence shown in Fig. 3.
3. Pressed the button MENU.
4. Green or red button remote elect IC TDA8366-TDA8366-1 or 2.5. Get in a chip by pushing the button white.
6. Elect a green option or the red button on the table. 1 or Table. 2
respectively ICs TDA8366, TDA8366-1 or 2.
7. Parameter is changing the "+" and "-" relating to the MENU.
8. Out of the MENU mode by pushing the button twice.
9. The adjustments are stored in the mode TT: dial code 16, the screen must
symbol appear TT16, after two seconds the installation will be made in the memory chip.
10. TV is turned off.
In this work with the likes of TV models ends.
Table 1
BIT ITEM Appointment
03 H SHIFT horizontal shift
04 H SIZE Horizontal Size
2
05 PIN AMP Cushion (average of the screen)
06 CORN PIN Pad (on the edges of the screen)
07 TITL vertical correction
08 V LINEAR linearity (lower part of the screen)
09 V SIZE Vertical Size
0A S CORR Linearity (upper part of the screen)
0B V CENTRE Vertical Alignment
0D HWB GREEN Green Balance
0C HWB RED Red Balance
0E HWB BLUE Blue Balance
10 BRIGHT Brightness
11 COLOUR saturationTable 2
BIT ITEM Appointment
0A END TRACK narrow / wide image
0F Y DELAY vertical correction
* * *
In addition to the analyzed method of entering the service menu TV models
shown, the firm uses in devices SONY her a few more methods.
The most common of these are combined with a switch (or switching)
TV standby mode. Then on the remote corresponding to the
models available, pressed the buttons in the sequence of the following: ON SCREEN DISPLAY,
"5", VOLUME "+", TV. Mode go by pushing the button "0" twice. By this method to operate your TV:
a) In the case of remote control RM-833: KV-M2540; KV-C2171D/K/KR, KV-C2173B / E,
for CHASSIS BE-3B; KV-C2508D / E, KV-C2503B / E, KV-2501A/D/K, KV-C2509B/D/E/K;
b) when using the remote RM-836: KV-M2171, KV-M1440, KV-M2101; KV-M2181,
KV-2180, KV-2540, KV-2170, KV-2181KR to CHASSIS BE-4; KV-29X1A / D / E / K / A / B / L / R / U
for CHASSIS BE-5; KV-16WT1A/K/R/U;
a) when the remote control RM-839: KV-29X1A / B / E / K / L / D / R / U on the CHASSIS BE-3D.Similarly, the method includes a menu of service vehicles with consoles that have
few other signs of buttons. Also in standby mode, dial the appropriate
combination of: DISPLAY, "5", VOLUME "+", POWER. So control your TV:
KV-S29RN1/34RN1 to CHASSIS G1 with remote control RM-821;
, KV-T21M1/MF1 / MN1 / MN11, KV-G21M1/P1/S11KV-T25MF1 with remote control RM-870.
Operates in the so-SERVIS: buttons "1" and "4" adjustable parameters elect, "3" and "6" -
decrease or increase in value, MUTE - entry, "0" - the performance record.
To exit press on the POWER button twice.
Another method of entering the service menu is associated with a synchronous connection
TV. To do this, simultaneously press on any two buttons on the front of the TV:
KV-S34JN1/MN1/SN1, KV-E2551A/B/E/K, KV-S29JN1/MN1 / SN1 - to CHASSIS AE-2B RM-remote control 831;
KR-S4613 - to CHASSIS AP-2 RM-832 remote control.
3
A variation of this method can be called the entry mode when you connect
synchronous machine by pressure the "-" and "+" on the front of the TV:KV-S2952KR - to CHASSIS AE-3 with RM-831 remote control.
There is a kind of method, as used by the connected power system. First
to double-press on the remote button ON. In the upper right
corner of the screen there inscription TT. Then push the MENU button on the remote to TV:
KV-S2942U, KV-S2941A/B/D/K, KVS2943E - to CHASSIS AE-2F with RM-831pultom.
ZAO "Center" Orbita-Service "technological trade center -15. Moscow Altufievskoe highway
* * *



عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 6:09 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:41 am

SONY BE-3B CHASSIS KV-24WS1A/B/D/E/K/R/U
. CXP85340A-116Q/117Q
RM-837. Set the standby unit. Then you need to press the remote
buttons in sequence ON SCREEN DISPLAY -> 5 -> VOLUME + -> TV.
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
* * *
SONY CHASSIS BE-3C
KV-C2503 B / E, KV-C2508 D / E, KV-2501 A / D / K, KV-C2509 B / D / E / K.
Identify a standby machine and push the button on the remote to
following sequence: ON SCREEN DISPLAY -> 5 -> VOLUME + -> TV.
Suitable remote RM-833 model.
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
* * *
SONY G1 CHASSIS KV-S29 RN1 \ 34RN1
Login to service mode
being implemented with the help of RM-821pulta. Connect the device into standby mode.
Then push the combination of the following keys on your remote: DISPLAY -> 5 -> VOL + -> POWER
* * *
SONY KV-21T10R
. In standby mode, set the TV,
and press the button on the remote control in sequence befitting ON SCREEN DISPLAY -> 5 -> VOLUME + -> TV.
* * *
Log in to the service in two ways by Sony. In that model, which
of them, I do not remember myself, but one of them will work, exactly. Thus:
1. Network disconnect. Press and hold the muzzle P + and P-buttons. Holding,
network to connect. Hold until the screen appears. Above right is obliged to
greens occur TT -. If not, try another option.
2. Translate StendBay TV (standby mode). On the remote
successively press' Display ', '5', 'Vol +', 'TV'.
After such a procedure must be at the top right green TT -.
If, after pressing the five heard the TV is turned on (whisper
high), then either did something wrong, or need to operate on
option 1. If this does not appear green, the same thing.
Note to the illiterate (can not read smart):
'Display' - This button on the Sony, usually a rectangle marked
with the corners rounded with a plus sign (+) inside, and close with a button that
usually a question mark is there (?) in green.
'TV' - button marked as a rectangle with rounded corners. No inside
rectangle or circle button - nothing.
Now details:
Usually, once in service, rather push the button 'MENU' button on the remote and
yourself in the service menu. But in some models does not work so simply.
Nuance number 1: AE-2 AE-2A,-2B Chassis AE.
Calling the menu, it is necessary to descend to the lowest point, marked as
'Demo'. In the user is truly demosh, but if
shine at the top right-TT -, this entry into the service menu.
Nuance number 2: Chassis AE-3 (100Hz)
Menu service is invoked by the command TT01. In general, if you are 100 gertsovom
TV was in the service mode, but can not find the menu, the detail of this for you, and dashed off.
Nuance number 3: Chassis BE-3D.
Log in 2 version. However, it is seen, although the documentation and do not reflect that
this procedure (option 2) to make three consecutive times. TE -
performed, not seen TT -, again in StendBay further. And so on,
until you see the TT-cherished -. And then the 'menu' and forward to the tanks.
Nuance number 4:
For option 2. At times, there is no button 'TV' button on the remote. Then it Zamesto
need to press 'POWER' (green). By the way, like tele-service
no menu, and do not look for it. There's all green, all for short (like VSP -
Vertical Shift ...), with no experience (or documents) will not understand (with
the first time). And the management here is somewhat different. Buttons '1 'and '4' -
that the parameters of movement, and the buttons '3 'and '6' - a change
option chosen. Well, another feature of this service - for
In order to set produced survived, prompting
their 'MUTE', '0 '. It's not bad, sausages can be it on anyone but for the
so back to the original settings, rather off-inc.
Nuance number 5:
Individual adjustment of the individual chassis operate only when filing
PAL signal. I remember at random in the chassis FE-1 "Tsenrtrovka horizontal"
and "delay of color" in the chassis BE-3D. Maybe there is still what I encountered on these here.
Nuance № 6: Chassis AE-4 (100Hz)
May encounter a situation such that most of the menu items are pale and not available for adjustment.
In order to make them available, it is necessary to transfer to a "Production mode"
TT62 team, return to the "Service mode" command TT61.
* * *



عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 6:11 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:44 am

There is such a thing. The chassis FE-1 if the TT99 to recruit, then removed to
monitor errors. There will be shown that the error and how many times
she observed. The monitor can cause errors and a different method: work
for option 2 enter the service, but Instead of the 'Vol +' pressure
'Vol-'. Zero plate TT80 team possible.
It is useful to make repairs after that in which case the track
emergence of new fault (or old, if not eliminated all).
The chassis AE-5 monitor errors caused by TT33.
There is a mode of service and the BE-2 chassis (this type of TV M2151, M2100,
M1400), but it can get a special service remote control. But
there are no settings there is almost, except the provisions of the secondary configuration
operational and asks the entrance to it only in case of change of the memory.
Fortunately in these boxes, it does not fly in practice.
Well, if you want strong, then: Service console can be prepared from individual
staff. The cheapest of Godea - it's RM-836 and RM-839.
They go with the apparatus chassis BE-3D (29X1, F3, F1, etc.). For processing
need to open the console. There, roughly in the middle of the board, is
jumper, apparently, as a resistor chip. Near it is the site
contact under similar jumpers. So, you need a jumper available
to another location to rearrange. At that, I do not remember, but there are only a couple of
options. If you guessed a jumper, then the button to switch format
will cause cherished bukovki TT -.
If someone has something to add to this, write to the soap for a private, one will add a lot.
* * *
Log in to service TV remote control Sony RM-932.
Remote RM-932-can produce a service without disassembly. To do this:
1.Nadavit button VCR / TV / DVD, so that the LED lights up TV.
2. Push and hold the yellow for about 5 seconds until the flashing TV.
3. Enter 99999. Light up all three svetodiodika. Remote service began.
4. To return it to normal mode, it is necessary to make steps 1 and 2, and enter 00000.
To raise the service menu, it is necessary to push video standby twice.
Good luck. Just did not break anything there, if not comprehend some points, then
do not touch the better. In general, it is best to contact your nearest SONY SO.
* * *
In SONY - «Chinese» (8873CSCNG6U21).
Microprocessor: TOSHIBA-HAY-23 8873CSCNG6U21,
quartz ZQ - 8MHz, memory EEPROM - 24C08, like UPS 3u01
chassis (trehtranzistorny "Chinese"). Works with remote 54V3 type.
Entering the service menu:
1. volume to remove the "0"
2. synchronously on the local keyboard, "VOL-" to press on the remote control DISP (rectangle with "+").
Find ourselves in the mode FACTORY
3. Once again, press DISP and end up in sub B / W BALANCE.
4. Once again, press DISP and find ourselves in the sub-F1.
5. Toggle menu pages - buttons digital direct
program selection (0-9 - the first time managed to get only
submenu 0-7 - then put the memory clean, can be
it is and need?) or by pressing MUTE - then fall into the sub-F1 - F15 can.
6. Exit s / m - by pressure DISP.
Note - in the service menu is a menu option F8 "unpleasant"
- Select the type of remote control - a remote control 4 is specified it, it does not change
(You can return the keypad buttons are local, while in this menu)!

With memory clean after initialization start - so good, but
Secam and no UHF reception (choose the type of tuner and IF in the service menu).
* * *



عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 6:12 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:46 am

Entering the service menu for
Sony TV remote RM-932.
Remote RM-932 - can be done without dismantling the service. To do this:
1.nadavit button VCR / TV / DVD, to light up the LED TV
2. push and hold the button yellow about 5 seconds until TV is not blink
3. Dial 99999. All three LEDs light up. Remote service began.
4. To return to normal mode it is necessary to make 1 and 2shagi, and 00 000 to enter.
To call the service menu, it is necessary to push video standby twice.
Good luck. Just do not napartachte there is nothing, if some points are not
you know, do not touch the better. In general, better ask in your nearest SONY SO.
* * *
TV and DVD SONY SP-118D.
Enter the service mode:
1 open position (on / off - set to off) press a button and holds the "MENU".
2 switches (on / off) set in position on, ie connect.
3 three seconds the screen will be dark and then light up and you are in the service menu! You can press "MENU" to let go.
PS: if the screen rotation feature should be included? Then,
"LOGO" and sign next to "turn over" to 0, change
1! (now after a simple menu you will have the function will turn over (turn the screen as you need it!).Get off at the beginning of the service menu, pressing a button "MENU"!
Turn off the TV & DVD - OFF to connect and vyklyuchatel.Teper drunk!
You can also include: menu, more; choose SEKAM, PAL, color balance, image size and more! Only carefully!
He came to repair the TV type SONY. On the board, the chassis does not exist on the back cover and compose MODEL-NEW.
Ingredients: BP. STRW6556A, Processor TMPA8897CSCNG7A15, HR LA78040,
ULF. AN17821, NOT. C5296, Tuner. ET-5EE-K06, 21-inch CRT SLIM,
TDKS. BSC27-T1051A, like the remote (one in one body WH-54), but it's not him.
Enter the service mode: the volume to 0 on the panel (deduct) + DISP we press on the remote.
* * *
TV START 2996
- Chassis - is unknown.
On the board, TH 29PNL-A.PCB. The processor on the label:
TDA9381C312A 21JUN05. MEMORY - 24C08A. ULF - AN17821A.
Manpower - LA78041. TUNER GDC ET-5S1E-EV100K.TDKS - E18C29-T1123B 04,010,627,010 № M05-06.21.
Entering the service menu: the button "MENU", then
Code 8,5,0,0, bust menu buttons from 0 to 9. Exit: Standby mode - Press 2 times.
* * *
TV SUPER, MIYOTA, OPERA, WARON
and the like. TFT TV 5 - 7 'ALL MODELS.
In TVs use video form LA76810A,
TB1238 and central control processor type: LC863324A, LC863320A, LC863332B, LC863328A.
Log into the service menu: there are a few buttons on the remote
Anonymous. To reach them, the top film should be
peel. To enter - exit the service is used
button, written as (PROD). Management VOL-, VOL +, CH +, CH-. The menu has three submenus with extensive settings.
* * *
LCD TV SUPERTECHNIKS TV-6600-st,
HT-555-26LAS5904 (chassis?) On the motherboard, the CPU LC863332B
(52S6 3J06). Remote without signs marking on the label handkerchief panel two: YX7253-1 and HT-001.
Enter the menu service: The volume removed at 0, holding
VOL - on the machine, press the button on the RETURN (to previous channel return).
the first time - FACTORY
the second time - B / W ADJUST
third time - ADJUST, section on how sub-divided - from 0 to 9.
Switching between items MUTE button on the remote. Connecting to the seventh page, SECAM.
* * *



عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 6:14 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:51 am

TV SUPRA (3Y11) CTV-21NX.
Entry into service: Press MENU, again MENU, then
Q. VIEW, and finally MUTE. Move through the pages of the menu - click SLEEP. Exit from service - click MENU.
* * *
TV Supra ST14CZ15S,
CPU
- LC863332B-53W3. The video processor - LA76810A, Remote
YKF-51N. Analog channel selector. The scheme is similar to 3Y01shassi, but the position of details do not match.
Entering the service menu. Remote apart. Several times jumper pins 2 and 14.
Return to the service pages - buttons ZOOM.
* * *
TV Supra S-29SL10 chassis clone 5Y19
(Label
chassis: 5800-A 5Y19 [/ b] 0-01). Memory - 24C08WP, processor - SUSOC
LA76938N 7N 58R2 6MA06, ZQ2 - 4,433619 MHz, ZQ1 - 32.768 kHz, the sound
CPU - AVIS 6XR8 LV1116N CD - LA78141, HOT - S2000AFI, ULF - LA42052,
BP - CQ1265RT - G28, FBT - BSC29-N2477, optocoupler - P621, Tuner - 5223-389W16-00 EWT-5F3T1-E06W.
Entering the service menu with the regular panel: VOLUMEustanovit to 0
Press MENU - to dial 6568 and there is a FACTORY, pushing clock (timer)
change: FACTORY - BW BALANCE - ADJUST. In ADJUST while pressing
RECALL (with the cross bar) change the page setup menu.
In the third ADJUST MENU in SETUP SELECT put a value 1 and there
All 22 pages MENU. If you select a timer - BUS OPEN, then this
regime there is no escape, only to turn off the chassis. Without EEPROM is connected,
but there is no screen, but with a clear
EEPROM is connected, there are adjustments, but is Auto Search, not finding
nothing, putting BAND OPTION = 3T and, UNER OPTION = 1, all TV
will remain a geometry set.
* * *
TV SUPRA S-14US30,

Chassis - 3P68R,
Processor - TDA11106PS/N3/3/AN9, memory - 24C08, PWM UPS - STR W6553A,
Tuner - GDC EWT-5F3T1-E06W, MUSIC - 2SD5023, KR - LA78040, TDKS -
BSC25-3355-87, a sound chip - TEA2025B, TPI - BCK-35-LF01X FJ.
Entering the service menu: MENU, then Q. VIEW, then PP.
trap menu - go to SC, dial 8 + 9. Exit - button DISPLAY.
* * *
TV SUPRA ST 21B55F
H-704V-05 chassis, CPU SDA555XFL-A14, video NN5198K, sound-MSP3460G.
Enter the menu service: With Remote Control - DISP., Then MUTE, then SLEEP, then finally FUZZY DISP.
* * *
TV TV SUPRA S-14US30 3P68R chassis.
Enter the service mode, pressing MENU, then Q. VIEW, then PP. Trap
menu - enter the SC, dial 8 + 9. Exit from the menu - DISPLAY.
* * *
TV SUPRA S-29SL10. 5Y19 Chassis.
Enter the service mode: remote control with home - a key hidden. Login
with universal MACa: code-1111-entry into the service menu key 2. The code-1401-management unit.
Below are all options service.
* * *
TV Supra ST14CZ15S.
Processor - LC863332B 53W3,
The video processor - LA76810A, Remote Control YKF-51N, analog channel selector.
The scheme is akin to 3Y01shassi, but do not match the positions of elements.
Enter the service mode. Remote apart. Jumper feet 2 and 14neskolko times.
Switch submenu in the service - the button ZOOM.
* * *
Apparatus Supra STV-LC2604W.
Enter the service mode:
working on a TV press on the remote: Mute, then Menu, then the sound menu
it choose Balans, enter (ok) (lit banner to balance) and quickly dial 3138.
The menu is a choice of service panels, film for non-compliance will be.
* * *
TV STV-2113MK2, STV-1415.
Enter the service mode: you have four seconds to carry out the procedure
entrance. It should be on TV keypad press (VOL-) and the remote control the following keys
sequentially. (Prog), (-), (TV). Press (PROGRAM DOWN), (PROGRAM UP)
choose options and change in the (VOL-), (VOL +). To store, press the red button.
* * *
TV STV-1414 / T, STV-2110.
Enter the service mode: the service is being implemented with the help of a special panel. Buttons (SVC).
* * *
TV STV-2905.
Enter the service mode: Push the button (SERVICE) remote control. 2).
In the picture with the OSD appears (display screen) "Line SVC". After that, push the button (-/--) control.
* * *
TV STV-2119.
Enter the service mode: you have to press buttons in series on the remote.
(DISPLAY), then (MUTE), then (SLEEP), and (FUZZY).
Then, when pressing buttons (DISPLAY) are made adjustable AGC and geometry, but when pressed SLEEP button - the white balance.
* * *
TV STV-2129, STV-216 MULTI, CS-29A6HTR.
Enter the service mode: (ST.BY), then (MUTE), then (MENU), and (POWER ON)
* * *
Television CTV-2139.
Enter the service mode: When pressured the AV button on the front panel,
TV's power to include and hold the AV button on the screen before the TV service menu.
Method Two: jumper at 250-500 ms kontaktiki connector service X 760.
The election option buttons P + or P-, the change in the VOL + or VOL-.
Memory is in the TV remote.
* * *
TV TATUNG: T32W440, T25/28N440, 440shassi processor: SAA5297.
Log into the service menu:
1) connect the TV by pressing the power, holding
Press down the MENU button on the keypad panel to the local until the red LED lights up.
2) Release the button and the MENU button to press STANDBY remote.
If the output voltage SCART connector 8 +12 V will be installed on the machine or a program mode will AV1.
Initialization of EEPROM memory:

  • If you change the EEPROM memory of the processor or the manager, must meet the following actions:
  • enter the service mode.
  • With buttons VOlUME + position INI CTV 831x increase, where x - version microprocessor.
In the end - version the control processor will be shown, as well as all data erased, with the exception of bits of options.
Adjust service:amr_ashraf37@yahoo.comelection options buttons P + / -.

  • Adjusting the settings buttons VOLUME + / -.
  • Saving automatically after exit from the service.
Besides standard adjustment of balance, geometry, AGC, it is possible to adjust the parameters of the following:
-Values ​​of geometry parameters must be set independently for the aspect ratio of 16:9 and 4:3.

  • Parameter EW16 need to establish the value of 3F.
  • The installation of the vertical geometry of the image to start with the VS parameter - the vertical linearity.
Setting the video channel (IFxxAFCxx) IF:
Installation Guide Channel drive on the sticker is located
the left side of the main board. This operation is necessary in the case
hold when the TV version of the N1 ICC2 provided chips and
Core LC7, associated with this chip. In other cases,
(In the absence of core LC7) the following must be installed:
AFC ...... 3
IF ...... 50

Adjustment of the second grid (Vg2 Test) tube:

  • With P + buttons to select the position Vg2, will display a horizontal line on the screen.
Adjustment potentiometer on the accelerating TDKS set on the border appeared to glow through.

  • push a button and VOLUME-seconds to wait for another image appears.
Setting the control bits (Cox):

  • The control registers set the values ​​as follows:
Co ...... 00
Co2 ...... 96
Co3 ...... 27
Bytes options:

  • Bytes options Op1, Op2 and Op3 to be installed in accordance with
    the version of the device by following the guidance (see the label in
    the unit).
Adjusting the A2 (LA / SA) stereodekodera:

  • Place your stereo to the input device A2sistemy.
  • disable the modulation in the left channel and parameter LA adjusted
    to achieve a signal amplitude of 1.4 V at pin SCART 1 connector.
  • SA parameter thus adjusted to a minimum signal level listening.
In the absence of the generator, the parameter value to LA to 01ustanovit, and the parameter SA - for the value 0B.

Delay adjustment of the luminance signal:

  • put delay the luminance signal to a signal bearing on them by color depending on the standard received:
Ys ...... 30 (SECAM)
Yp ...... 18 (PAL)
Yo ...... 22 (SCART)
Yn ...... 20 (NTSC)
Mapping programs in the NTSC system is acceptable only for low-frequency connector SCART.
Exit from service: to put pressure on the TV remote control.
* * *
TCL TV type TC1632TV, M66 (M68) chassis.
Mikrorotsessor: TDA12062H/N1F00, HR: STV9302, Sound: TDA7266SA,
Power supply: TDA16848, FBT: BSC 25-0252T Memory: 24C32.
Entering the service menu:

  • Hold the button on the panel TV (V-) to remove the volume control to "0",
and it does not hold, push button three times "CAPS" on the remote. Included
in the service menu. Then, on the remote control number buttons to elect a group
value and volume adjustable. Exit from service - a button on the remote
control AV / TV. The device does not start with a blank memory.
* * *
TV TCL21E20S - M66 chassis (M66S).
UOC - TDA12062H/N1F00, Label: V8-T00M68 13M34,
IC CD - STV8172, EEPROM - 24C32, HOT - 3DD1556, TDKS - BSC 25-0252T, Key
UPS - SK3115, IC PWM - TDA16846-2P, Tuner - TEDE9-284B.
Defect: The color is missing in the PAL system and the sound is completely absent.
All of ARC restored. Hold the (V-) panel TV
to retract the "0" volume, and it does not hold, press three times at
the remote button "CAPS". Included in the service menu. Further, the remote
digital buttons, select group of values ​​and the volume is adjustable. Exit from the service - on the remote button AV / TV.
We enter into a service mode (see the link), press the number button
remote "8". A list of OR01 OR10 ... options. OR06 elect and open.
The top line DCXOMUX is listed on the contrary P3DCXO set and there is color in the PAL system immediately.
To activate the audio on the findings of UOC does not leave out this option,
but only one row below the falls on QSS and opposite "QSS Amp not active" set. Other lines (options) - no change.
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
In the photo shown, as must be the correct option OR06 exposed.
* * *



عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 6:21 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:52 am

TV Telestar PT-92,
CPU
TDA9353PS/N1/2L0248 TDA9353W1 TELRA, memory 24LC16B, PAL, BG, geom.est, Teletext is.
Entering the service menu: "SUB-PAGE" (TXT hours) on the remote at the TV and "Volume -".
* * *
TV TOMSON 21MX170S,
purchased here, sound, color,
Russian teletext chassis TX807CS, processor TDA9554PS/N1/1I0674 K0J009
CA1737 IVV 2.30, an audio processor MSP3415G B8, memory 24W04.
Entering the service menu: in stendbay move, the network turned off.
Txt on the remote press and hold, the network included. If there is no control of the native, the MAC 1272, 1320.
* * *
TV Thomson 29DCH61KG
Chassis - M68 - UOC - TDA
12062H/N1F00 Sticker - V8-0000M68-TM3V417 SG5741.1 CH5704, EEPROM - 24C32WP,
KR - STV 9302, ZQ1 - 24.576 MHz, HOT - D3402, ULF - TDA 7266SA, FBT -
BSC 29-0123Q 37-FCAT04-EAAOA, VC739997K26, PWM UPS - TDA 16 046-2P,
TPI - BCK 4925 36-TRF164-AXO, Key UPS - P77W78 K3451, IF - K2966M,
Tuner - 07-389F15-NA3G FSBP05P-3-E, OS - SCD29311VX2, picture tube - A68QFZ893X001.
For reference.
1. Television without EEPROM is connected and working, but the inclusion of executed about 30 seconds.
2. C EEPROM «clean» (FF) TV for about 30 seconds worth in the DR, then
he needed to "help" connect, provided that he does not himself
this, after you connect the TV stays in the service menu in the
mode "run", respectively, the values ​​of all the service menu to 0.
I do not recommend it to include a blank memory, since the process of setting up the TV is very heavy and cumbersome.
Entering the service menu: with remote staff: Volume set to "0"
holding it, pressing quickly on «CAPS» three times, get out of it: «EXIT» - «TV / AV».
* * *
TV THOMSON 21DCH61KG (M61shassi).
CPU
- TDA12060H \ N1F00 CK1797 SH5031.1 17 ZSG0748 N1F, Quartz - 24.576 MHz
Memory - 24S16WP, IF filter - K2966M, Tuner - TEDE9-284B 07-389FI5-NB1G,
Key UPS - K2645, Frames - STV8172A, TPI - BCK-4038 36TRF020-AX5,
PWM - TDA16846-2P, MUSIC - D1556, picture tube - A51ERS357X440,
TDKS - 37-FBAT04-CAA0A BSC-25-0252T, OS - AT7400 \ 10 05061EA07496.
Entering the service menu: TV THOMSON 21DCH61KG:
1. throw in the TV mode on duty.
2. button to disable network TV
3. press «TEXT» button on the remote 4. TV button to connect the network, holding the remote «TEXT», before the image.
5. buttons "1" - "9" switch adjustment service
6. out of service: click "OK" button on the remote
* * *


عدل سابقا من قبل أشرف عثمان في الجمعة يوليو 22, 2011 6:22 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - SONY   الجمعة يوليو 22, 2011 5:53 am

TV THOMSON 21NF3S - NX59 chassis.
TDA11136PS/N3/3 08 CR2885 2TRF25155.1
Sticker on the CPU: V8-NX59AP2-TMV616, remote control - R166E.
Entering the service menu: press the "menu", contrast, 9735vybiraem, go - off with the remote.
* * *
TV Thomson 42WS90E (plazma).
Enter the service mode: Hold down the buttons and vol + vol-, network key to connect.
Apparatus TJT53TTS502D. M4 chassis.
Suitable control of
Funaya S2100PF entirely. Enter the service mode: switch-within
service menu - exit the service menu - is bridged on a chip
SC7461-103 in the control pins 2 and 16. Service is established in the likeness of options from Funai S2100PF.
* * *
TV TOPAZ KT-5489.
LC863320A-5M99, LA76810A. . Entering the service menu:
Volume set to minimum. At the same time to press Volume - on the TV and Recall on the remote.
* * *

الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
سرفس مود - SONY
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: