Chassis TV2KY STV-1401, STV-2101 percent. LC863532B
login - Method one: Press the button on the remote control (FACTORY) for its
lack of press (MENU) and while the on-screen menu is displayed, enter
the TV with the remote code (6) (4) (
(3)
output also - MENU 6483
Method
two: close pins 2 and 16 of the HC7461 chips in the remote. To memorize
the settings and exit the menu, select MENU 03 points PROD MODE set to
"0" and press (MENU)
chassis EX-1A1, EX-1A4 STV-1421C, STV-2121N, STV-2122F percent. TDA9381PS/N2/2T10
login - Set the remote control volume value to 0. Press the button on the
remote control (MUTE) and hold it down, press (MENU) on the TV.
Model TC2106A. STV-2131N, STV-2132F Proc. TMPA8803
login1). turn the TV on channel 30.
2). turn the TV on channel 88.
3). set the volume to 0.
4.) Press (MUTE).
chassis CH-16 (S), 25F83, PF25F83, PF29F83. STV-2521N, STV-2522F Proc. TDA9384
login - Set the volume at "0" with the remote. Press the (MUTE) on the remote
control button (MENU) on the front of the TV and hold for 2 seconds.
chassis 3S10 SB-1415, SB-2139 Proc. ST92185
login - Click successively on the remote control buttons (MENU) (AV) (ANAL).
output - Turn the TV into standby mode.
Chassis M5 SB-2106 Proc. M5ENGV1
login - Set the volume to "0" button (VOL-) to the front of the TV and hold the button (VOL-) press (DISPLAY) on the remote.
M13 chassis SB-2508 Proc. TMPA8809
login - Turn on the TV to normal operation. Button (VOL-) on the control
panel TV set the volume level to "00" and holding it, press three times
(Display) on the remote. Appears on the screen D.
Exit the service mode preserving options by setting the TV to standby mode.
M17 chassis SB-1419, SB-2108, SB-2135 Proc. TMP87PS38N-M17
login - Turn on the TV to normal operation. Key (VOL -) from the control
panel TV set the volume level to "00" and holding it, press the
(Display) on the remote. Appears on the screen service menu «D».
Exit the service mode preserving options by setting the TV to "Standby."
M28 chassis SF-2112 Proc. TMPA8821PSNG
login - Turn on the TV to normal operation. Key (VOL-) from the control panel
TV set the volume level to "00" and holding it, press the (Display) on
the remote. Appears on the screen «D».
Exit the service mode preserving options by setting the TV to standby mode.
Chassis SN9, SN9-EA SB-2107, SB-2136, SB-2137, SB-2138, SF-2109 Proc. TMP87CM38N
login - Set volume to 0. Press MUTE on the remote and holding it, press the MENU button on the front of the TV.
model LCD-2011/3777 prots.SAA5264PS/M3/0104, video STV2248H.
login - Press the MUTE button and the number button 266,071 on the remote
controller to enter into factory menu, adjust, display, cal.