أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةالتسجيلدخول
https://twitter.com/ashraf69osman--- https://www.facebook.com/ashraf.osman.73-- https://plus.google.com/u/0/+ashraf5914

شاطر | 
 

 سرفس مود - RUBIN

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: سرفس مود - RUBIN   الجمعة مايو 06, 2011 10:30 pm

model 72DS10
login
- You need a standby mode press the menu button on the front of the TV
and the 0 button on the remote. In order to remember the settings, press
the TV button and holding it off the TV from a network

model 72FDS10
login
- Press the menu button on the front of the TV and the 0 button on the
remote. In order to remember the settings, press the TV button and
holding it off the TV from a network

Model 55FS10
login - In standby mode, press the menu button on the front of the TV and the 0 button on the remote.
In order to remember the settings, press the TV button and holding it off the TV from a network

model 55FM09-8
login - In standby mode, press the "menu" on the TV, holding press "0" on the remote.
Saving Settings button TV \ OK Browse options CH + or CH-Change Vol + Vol-

Model 51M10
login in standby mode, press the menu button on the front of the TV and the 0 button on the remote.
In order to remember the settings, press the TV button and holding it off the TV from a network
Removing the lock: enter the menu "Options", select "Lock", press the remote control: 2, 2, white button

Model 63M10
login - In standby mode, press the menu button on the front of the TV and the 0 button on the remote.
In order to remember the settings, press the TV button and holding it off the TV from a network

Service mode range S06
login
- When you book. AV turn on the TV's power and hold it for five
seconds, or close contacts at the 250-500 ms 6 and 7 of the service
connector.
Making a memory book. TV.

Series S07 percent SAA5531PS/M4/0599
login - Turn on the TV by pressing the button (volume +) and (menu) on the front of the TV.

Model 72S10
login - In standby mode, press the menu button on the front of the TV and the 0 button on the remote.
In order to remember the settings, press the TV button and holding it off the TV from a network




_________________

الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - RUBIN   الجمعة مايو 06, 2011 10:30 pm

Rubin (chassis M06)
When pressed AV power on the TV and hold the button for 5 seconds.
Another way: close to 250 ... 500 ms terminals 6 and 7 of the service connector.
The choice of parameters, the keys P + or P, the change in values ​​- the VOL + or VOL-, write to the memory - TV button

RUBIN 55M10, 55M10T, 55FS10T, 55FS10TR TDA9351hhh
To
enter the technological menu to put the television into standby mode,
then simultaneously press the "Menu" button on the front of the TV and
the "0" button on the remote. After you set the TV mode process menu on
the TV screen should display "38 MHz".
Required option is selected the button "P +", "P".
Adjust the selected option by pressing buttons «V +», V-».
To
save the adjustments press the button «TV», hold it, turn off the TV
from seti.Sleduet note that when replacing the processor D101 to the new
chip should have a firmware version «Rubin».

Rubin 37/51/55M09 (T), 37/55M09 (T) -1, 37/51/55M09 (T) -2, 37/51/55M09 (T) -3, 51/55M09 (T) -4
To
enter the service mode switch the TV into standby mode. Then hold the
menu button on the front panel, press "0" button on the remote. You
should see the service menu. To scroll through menu items using the
buttons to switch programs P ±, and to adjust the settings - buttons VOL
+ / -.
Initialize chip EEPROM
This operation is required after replacing the EEPROM chip D404i in the following order:
● In service mode, consistently pushing the button "9" and the VOL + or VOL-;
● On the screen you should see the message «IniSTTV V1.1»;
● disconnect from the network TV for a few seconds, and then include;
● enter the service mode;
● On the screen you should see the message «PIF 3C0» - the value of the drive image as well 38MGts



_________________

الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
سرفس مود - RUBIN
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: