أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا
أشرف عثمان للإلكترونيات
هل تريد التفاعل مع هذه المساهمة؟ كل ما عليك هو إنشاء حساب جديد ببضع خطوات أو تسجيل الدخول للمتابعة.


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةأحدث الصورالتسجيلدخول
بسم الله الرحمن الرحيم اللهم صل وسلم وبارك على سيدنا ونبينا محمد صل الله عليه وسلم الرجاء من الجميع الدعاء لمدير الموقع بالرحمه والمغفره.

سبحان الله وبحمده .. لاحول ولاقوه الا بالله..لا اله الا انت سبحانك اني كنت من الظالمين .. اللهم صل وسلم وبارك على سيدنا ونبينا محمد صل الله عليه وسلم
https://m.youtube.com/c/ashraf5914?reload=9&reload=9

 

 سرفس مود - ROLSEN

اذهب الى الأسفل 
كاتب الموضوعرسالة
أشرف عثمان
المدير العام
المدير العام
أشرف عثمان


الأعلام : سرفس مود - ROLSEN Male_e10
عدد المساهمات : 2402
تاريخ التسجيل : 16/06/2010
العمر : 63

سرفس مود - ROLSEN Empty
مُساهمةموضوع: سرفس مود - ROLSEN   سرفس مود - ROLSEN Emptyالجمعة مايو 06, 2011 10:28 pm

Butterfly "Butterfly"
Login
1. Set the volume equal to "O". (Required)
2. Press the button on the remote "MUTE"
3. Hold down the "MUTE", press "MENU" button on the front of the TV.
4.
On the screen in the right corner will light up the letter "D", and in
the left corner will show the adjustable parameter and its value.
5.
Page menu changes "CAL" button switching parameters are green and red
buttons on a blue field panel. Change made of yellow and blue buttons on
a blue field.

model C2910, C2519, C2988, C1410, C1420, S2116, C2118, C2119 (Dvuchipov with the new processor CH08TO934)
C21R21, C2121, C2190, C21R90, C1420 (odnochipov)
C1425
login
1. Set the volume equal to "O". (Required)
2. Press the button on the remote "MUTE"
3. Hold down the "MUTE", press "MENU" button on the front of the TV.
4.
On the screen in the right corner will light up the letter "D", and in
the left corner will show the adjustable parameter and its value.
5. Page menu changes "CAL" button
Switching
parameters are green and red buttons on a blue field panel. Change the
settings made with yellow and blue buttons on a blue field.

model C2131, C2133, C2150, C2192, C2195
login
1.When using the service console
2. Having closed for a short time, 1 and 3 pin terminal A2 through a resistor 2.2 kOhm
3. Using a conventional remote control press the following key combination:
• reduce the volume to "0"
• Press «menu»
• choose an icon for "suitcase"
• score consistently "5" "1" "7"
• Press the green button
Exit from the service menus on the TV / AV button on the remote control.

model C1440, 2146,2148,2139, S2150SEZ
login - Button "V +" on the TV and "0" button on the remote in safe mode.

Model C2150Z Processor TDA9381PS/N3/1/1730 EEPROM 24C08
line transformer PET22-23C
login - Set the volume at "0", turn off the TV in standby mode
click and hold (V +) on the TV, then press "0" button on the remote control, withhold
button down until the brightness of green LEDs will not increase.

model C2160, C21R65, C2165, C21R65
login
- Press the VOLUME DOWN ON THE front of the TV, after reducing the
volume to the "O", CLICK THE "DISPLAY ON CONSOLE", continuing to hold
the VOLUME DOWN button on the front.
EXIT - Turn off the TV

Model S2135
login
- We must open the console closest to the chip contact pad is not
withdrawn under the button. If it peremknut TV will enter the service
mode.

model C29R100, C29R140, C29R142, C29R148 (Rolsen 100 Hz models)
Service console on Rolsen 100 Hz is made of any RC-5 compatible (based on m / s 3010)
Login mode service (execute sequentially):
1.Nazhat SVC click on the service console 1 / 2 (or close to the same time, pins 1 and 11)
2. Press the OK button on the remote.

model C72FDS107, 109
login

Click the first button [PRESET], then [TEST] service panel on the
screen in the upper right corner shows a letter M. To exit the service
mode, press [TEST] on the service console. You can also exit the service
mode by pressing the [STANDBY].
Input from the user console: Press the [MENU], you will see the menu "Image".
Press the number buttons [6] [4] [8] [3] on the remote.
In
order to enter into service menu M1 ~ M4, press the corresponding
number button on the remote. To enter the service menu M5 ~ M0, should
press the button first [CALL] to exit the M1-M4, you will see the letter
M, then successively press [LOCK] (Figure suitcase with a handle) and
from the number buttons [5 ] [6] [7] [8] [9] [0] to enter the M5 ~ M0.
If you're in some sort of menu M5 ~ M0, then go to another menu can be
done without pressing the [LOCK], but only the numeric keys.
• In the service mode by pressing [-/--] can enter a mode BUS OPEN.
When you press this button output this mode.



_________________

الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام
أشرف عثمان


الأعلام : سرفس مود - ROLSEN Male_e10
عدد المساهمات : 2402
تاريخ التسجيل : 16/06/2010
العمر : 63

سرفس مود - ROLSEN Empty
مُساهمةموضوع: رد: سرفس مود - ROLSEN   سرفس مود - ROLSEN Emptyالجمعة مايو 06, 2011 10:28 pm

ROLSEN C2519, C2521, C2910, C2988 (Chassis CH10)
Log
into the service mode has been done with the service console is
supplied separately (button D). CAL button on the remote control select
the control parameter.
To navigate pages use the buttons P + or P-.
Selected position change the VOL + or VOL-.
Processor S3P8837DZZ-AQB7.
Exit the service mode by turning off the TV.

ROLSEN C21R21 (shassiEH-1A1)
Protsessor-TDA9381PS/N2/2I1091.
Log
into the service mode is done with the help of the native console. To
begin with clean volume to zero, then press both the button on the
remote and MUTE button on the front of the TV MENU.

Rolsen RL-15S10
To
enter the service mode SVC, simultaneously press and hold for some time
the MENU button on the TV front panel and remote control.

Rolsen C2131, C2133, C2150
In
service mode televisions can enter through the service remote control
(RC), if it exists, or by regular remote. In the second case, you must:
- Reduce the volume to zero;
- On the remote control button «MENU»;
- The menu that appears select the icon "suitcase";
- Consistently push the button "5", "1" and "7";
- Press the green button on the remote control.
To
exit the service is the main menu, press the button «TV / AV» button on
the remote. In the non-volatile memory chip records all user-entered
adjustment.

_________________

الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
سرفس مود - ROLSEN
الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1
 مواضيع مماثلة
-
» سرفس مود - SEG
» سرفس مود - _LG
» سرفس مود - TCL
» سرفس مود - ERC
» سرفس مود - HPC

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: