أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةالتسجيلدخول
https://twitter.com/ashraf69osman--- https://www.facebook.com/ashraf.osman.73-- https://plus.google.com/u/0/+ashraf5914

شاطر | 
 

 سرفس مود - POLAR

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
MSA
مشرف عام
مشرف عام


عدد المساهمات : 542
تاريخ التسجيل : 16/06/2010

مُساهمةموضوع: سرفس مود - POLAR   الخميس مايو 05, 2011 10:27 pm

model 54CTV3068 70CTV3052
login
- Turn on the TV to normal operation. Button "VOL -" on the control
panel TV set the volume level to "00" and holding it, press the
"Display" on the remote. Appears on the screen service menu. D
output - STAND-BY

TDA9351 POLAR1.0 / TDA9381 POLAR2.0.
1.Login the service mode is possible in two ways:
a)
Insert the chassis into operation on the service remote press «SERV»,
holding it, press the «» (on-board remote from the usual m / c IC1
closed conclusions 3 and 9, 1 and 15, respectively).
b) Insert the
chassis in a sleep mode on a conventional remote control to press the
keys sequentially «STATUS», «MENU», «MUTE», «STBY».

model 37CTV3160, 54CTV3160
1. Login in service mode: Turn on the television to normal operation. Press the «MENU» button three times then «RECALL»
three-fold. Appears on the screen service menu.
2. Select a page in the service menu by pressing the button with RCU «MENU» (see Table 1).
3. Selecting - buttons "CH *" and "CH /".
4. Changing the value buttons «VOL»
Exit the service mode preserving options by setting the button «RECALL» or the TV to "Standby."

model 37CTV3165
1. Login
in service mode: Turn on the television to normal operation. Press the
«MENU» once, then click «RECALL» five times in a row. Appears on the
screen service menu.
2. Select a page in the service menu by pressing the remote control with digital buttons
3. Selecting - buttons «PRO».
4. Changing the value buttons «VOL».
5. Exit the service mode preserving options settings by pressing
Buttons: "0" then «RECALL».

model 13LTV1010, 17LTV1020. processor control LC863332B percent. LC863332B
POLAR LCD 13LTV1010, 17LTV1020 processor control LC863332B.
Login
in the service menu: Turn on the television to normal operation on the
remote control press the following button sequence, "POWER", "MUTE",
"CALL", "TIMER", "".
Appears on the screen FACTORY. Press the "TIMER", will open the first line of the menu white balance adjustment.
Go to the next line by c remote control buttons, "CH", changing the digital value of bytes - the buttons "VOL".

Model 3700, 5100, 5400 . Service menu for the processor SAA5531 SAA5541 (CTV832R):
Login in the service menu is possible in two ways:
1). Turn on the TV in the working mode and 0.25 seconds to close the connector X760.
2).
Turn the TV into operation on the remote control press service (SERV),
hold the press (!) (On-board full-time remote control of IC1 have closed
the conclusions 3 and 9, 1 and 15, respectively).
After completing the setup for outputand the service mode and save the data click on the remote control key TV (closed on 1 and 9 conclusions IC1).

Service menu for the CPU LT01D 51KC (ZiLOG):
Login the service mode is possible in two ways:
1). to service the remote control button (FACTORY).
2).
Turn off your TV into standby mode on the remote controller RC-0201
press (MUTE) and turn on the TV to normal operation. Movement in the
service menu by pressing the keys with remote (CH-), (CH +). Tincture
parameters are the keys remote control (VOL-), (VOL +). After completing
the setup to exit the service mode and save the data click on the
remote control key (MENU).

Service menu for the CPU SDA555XFL: Login the service mode is possible in two ways.
1). Dial the remote control code 062596 and press (MENU).
2).
Turn the TV into operation on the remote control press service (hours)
(on-board remote from the ordinary of IC1 closed pins 1 and 15).
Movement in the service menu by pressing the keys with remote (CH-), (CH
+). Tincture parameters are the keys remote control (VOL-), (VOL +).
After completing the setup to exit the service mode and save the data
click on the remote control key (MENU). Removing the LOCK mode: In case
if I forget a confidential code, enter twice universal code (0711).
Proc. STV832R SAA5541 SAA5531 chassis S02 S02-R S02-RT S02-R39 S0202.

model 37CTV1015. .
Login the service mode is possible in two ways:
1). On the service remote control button (FACTORY).
2).
Turn off your TV into standby mode on the remote controller RC-0201
press (MUTE) and turn on the TV to normal operation. Movement in the
service menu by pressing the keys with remote (CH-), (CH +). Tincture
parameters are the keys remote control (VOL-), (VOL +).
After completing the setup for outputand the service mode and save the data click on the remote control key (MENU). Proc. LT01D 51KC chassis S03-z.

Model 3700, 51CTV1010, 54CTV1039 . Service menu for the processor SAA5531 SAA5541 (CTV832R):
Login in the service menu is possible in two ways:
1). Turn on the TV in the working mode and 0.25 seconds to close the connector X760.
2).
Turn the TV into operation on the remote control press service (SERV),
hold the press (!) (On-board full-time remote control of IC1 have closed
the conclusions 3 and 9, 1 and 15, respectively). Movement in the
service menu by pressing the remote control keys (CH-), (CH +). Tincture
parameters are the keys (VOL-), (VOL +). Using the remote control keys
(0 ... 9) You can select a desired menu item.
After completing the setup for Released the service mode and save the data press the button on the remote TV (closed 1 and 9 of the findings IC1).

Service menu for the CPU LT01D 51KC (ZiLOG):
Login the service mode is possible in two ways:
1). On the service remote control button (FACTORY).
2).
Turn off your TV into standby mode on the remote controller RC-0201
press (MUTE) and turn on the TV to normal operation. Movement in the
service menu by pressing the keys with remote (CH-), (CH +). Tincture
parameters are the keys remote control (VOL-), (VOL +).
After completing the setup for outputand the service mode and save the data click on the remote control key (MENU). Proc. SAA5541/832R SAA5531/832R
LT01D 51KC chassis S04-R S04-RT S04-R39 S04-z S04-z39.

model 37CTV1010, 51CTV1010, 51CTV2010, 54CTV1039, 37CTV1410, 51CTV1410. Service menu for the CPU SDA555XFL:
Login the service mode is possible in two ways.
1). Dial the remote control code 062596 and press (MENU).
2).
Turn the TV into operation on the remote control press service (hours)
(on-board remote from the ordinary of IC1 closed pins 1 and 15).
Movement in the service menu by pressing the keys with remote (CH-), (CH
+). Tincture parameters are the keys remote control (VOL-), (VOL +).
After completing the setup for outputand the service mode and save the data click on the remote control key (MENU).
Proc. SDA555 chassis S05-z S05-I S05-z39 S05 S05-1.

model 51CTV1029, 51CTV2029, 51CTV2129, 54CTV1029, 54CTV2029, 54CTV2129 . Service menu for the CPU SDA555XFL:
Login the service mode is possible in two ways.
1). Dial the remote control code 062596 and press (MENU).
2).
Turn the TV into operation on the remote control press service (hours)
(on-board remote from the ordinary of IC1 closed pins 1 and 15).
Movement in the service menu by pressing the keys with remote (CH-), (CH
+). Tincture parameters are the keys remote control (VOL-), (VOL +).
After completing the setup for outputand the service mode and save the data click on the remote control key (MENU).
Proc. SDA555 chassis S06-z S06-I S06-i1.

model 51CTV1229, 54CTV1229, 51CTV4029, 54CTV4029, 51CTV4929.
login possible in two ways
1).
Turn the TV into operation on the service remote control press (SERV)
and holding it, press the «» (on-board remote from the ordinary of IC1
closed conclusions 3 and 9, 1 and 15, respectively).
2). Turn on the
TV in standby mode, the normal remote control to press the keys
sequentially (STATUS), (MENU), (MUTE), (STBY). After completing the
setup for outputand the service mode
and save the data click on the remote control key AV / TV twice (1 and 9
are closed conclusions IC1). Proc. TDA9351 TDA9381 chassis S07 S07-2.

model 37CTV4110, 51CTV4110, 54CTV4110, 37CTV4010, 51CTV4010, 54CTV4010 37CTV4015.
Login the service mode is possible in two ways:
1).
Insert the chassis into operation on the remote control press service
(SERV), holding it, press () (on-board conventional remote control of
IC1 have closed the conclusions 3 and 9, 1 and 15, respectively).
2).
Turn on the TV in the working mode, and then transferred to the standby
mode, the normal remote control to press the keys sequentially
(STATUS), (MENU), (MUTE), (STBY).
After completing the setup for outputand
the service mode and save the data: click on the remote control key AV /
TV twice (1 and 9 are closed conclusions IC1). Proc. TDA9351 POLAR1.1
chassis S08 S09.

Model 3701, 5101, 5401, 5401-STEREO . Service menu for the processor SAA5531 SAA5541 (CTV832R):
Login in the service menu is possible in two ways:
1). Turn on the TV in the working mode and 0.25 seconds to close the connector X760.
2).
Turn the TV into operation on the remote control press service (SERV),
hold the press (!) (On-board full-time remote control of IC1 have closed
the conclusions 3 and 9, 1 and 15, respectively).
After completing the setup for Released the service mode and save the data press the button on the remote TV (closed 1 and 9 of the findings IC1).

Service menu for the CPU LT01D 51KC (ZiLOG):
Login the service mode is possible in two ways:
1). On the service remote control button (FACTORY).
2).
Turn off your TV into standby mode on the remote controller RC-0201
press (MUTE) and turn on the TV to normal operation. Movement in the
service menu by pressing the keys with remote (CH-), (CH +). Tincture
parameters are the keys remote control (VOL-), (VOL +).
After completing the setup for Released the service mode and save the data click on the remote control key (MENU).

Service menu for the CPU SDA555XFL: Login the service mode is possible in two ways.
1). Dial the remote control code 062596 and press (MENU).
2).
Turn the TV into operation on the remote control press service (hours)
(on-board remote from the ordinary of IC1 closed pins 1 and 15).
After completing the setup for Released the service mode and save the data click on the remote control key (MENU).
Proc. CTV832R SAA5531 SAA5541 LT01D 51KC SDA555XFL chassis S52 S52-R S52-RTS.

model 63CTV3050, 70CTV3050, 63CTV3052, 70CTV3052, 70CTV3055, 63CTV3055 .
login
- Turn on the TV to normal operation. Key (VOL-) on the control panel
TV set the volume level to "00" and holding it, press three times
(Display) on the remote. Appears on the screen D.
Exit the service mode preserving options by setting the TV to standby mode.

model 54CTV3060, 54CTV3062, 54CTV3065, 54CTV3068 .
login
- Turn on the TV to normal operation. Key (VOL-) from the control
panel TV set the volume level to "00" and holding it, press the
(Display) on the remote. Appears on the screen «D».
Exit the service mode preserving options by setting the TV to standby mode.
الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
سرفس مود - POLAR
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: