أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةالتسجيلدخول
https://twitter.com/ashraf69osman--- https://www.facebook.com/ashraf.osman.73-- https://plus.google.com/u/0/+ashraf5914

شاطر | 
 

 سرفس مود - PHILIPS

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
MSA
مشرف عام
مشرف عام


عدد المساهمات : 542
تاريخ التسجيل : 16/06/2010

مُساهمةموضوع: سرفس مود - PHILIPS   الخميس مايو 05, 2011 10:24 pm

Chassis 3A 17CE7630 21CE7649/55/7590 17CE7531/7650 247,771 41CE8746. Proc. MAB8461P
login - Click (MONO) TV on your keyboard. Keep it to include TV with remote control
output - STAND-BY

Chassis A8.0
Service default mode: Close contacts 9040 and 9041 continue to log on to geometry (SAM mode) Simultaneously press "VOL -" and "VOL +" on the panel TV.
Exit - STAND-BY

Chassis ANUBIS S ANUBIS S / DD percent. PCF84C844 PCA84C8844/133/107
login - Close contacts of M31 and M32 (common) near the chip IC7710.
output - POWER OFF

chassis AA5 17PT156B Proc. TMP47C1637
login
- Close the conclusion that S1 and plant pins 7 processor on the
ground) and then enable the network button. Caught in the mode of SDM.
Next, simultaneously press the buttons (+) and (-) on TV.
output - POWER OFF

Chassis D16-II 25DC2660, 28DC2070, 28DC2670 percent. 80S31
Service default mode: Hold the button on the TV (VOL +) and (P +) to include a network switch.
Service Mode: Close the control points M30 and M31
output - TV MODE

Chassis D2-MAC EUROCRYPT BBD-901
Login
in service: shut down the network, press and hold button (+) and (-) on
the front panel, to include in the network. Memorization of any change -
through (OK).
Exit - (STANBY)

chassis E-6 28PT-4505 percent. SAB-C502-2R20N
login - Turn on the TV in the operating mode and dial on the remote (TV) (i) (STOP) (TV) (i) (STOP)
output - (STANBY)

Chassis EM2E 32PW8506/58
login - Press the button on the button and 062596 (i) or MENU.

chassis FL1.10 25PV7505 25SL550 33PT700A/712A
1. For the regime SERVICE DEFAULT MODE - Closed point S24 S25 located on the motherboard SSP. With the remote control press (MENU) (Blue) (Red) (MENU +) (MENU OFF)
2. To activate the SERVICE MODE Close the control points S23 and S24 are located on the motherboard SSP output - STAND-BY

chassis GR2.2 Proc. TMP47C1637
login - Close the terms M33 and M34 on the main board and press the (install) with the remote.
output - STAND-BY

Chassis GR2.2AA 25RT400/42, 25RT410/42, 28RT400/42, 28RT450/42
login - Close the M33 and M34 the points on the main board and press the button (INSTALL).
Exit - STND-BY

chassis L6.1 21PT1342 percent. TMP47C1637N, SAA5290
login - The process for 1 - to close the contacts S1 and S2 on the processor (pin 14 chip IC7600).
Method 2 - on the service console model RC7150 click on DEFAULT or ALIGN
output - STAND-BY

Chassis L6. 1AA
14PT-1432/43, 14PT-1352/00/01/05/07/11/39, 14,20 PT-1542/01/43,
14PT-1552/00/01/05/11, 20PT-1342/43, 21PT-1532/58, 37TA-1232/03,
37TA-1432/03, 37TA-1462/18, 37TA-1473/18, 52TB-2452/19, M-2052/00/01,
M-2152/00 / 07/15, M-2182/00, M-M192/05
login
Method 1 - short circuit the terminals S1 and S2 on the processor (pin 14 chip IC7600).
Method 2 - on the service console model RC7150 click on DEFAULT or ALIGN.
Exit - POWER OFF

chassis L6.2 20PT1353 Proc. SAA5290ZP/039/040/055
login
Method 1 - short circuit the terminals S1 and S2 on the processor (pin 14 chip IC7600).
Method 2 - on the service console model RC7150 click on DEFAULT or ALIGN.
output - STAND-BY

Chassis L6.2AA 25PT4103/60 Proc. SAA5290ZP/040
login - Close the control points, "0053" and "0054" near the processor. output (STANBY)

Chassis L7, 1A/AA
14PT18A/50B/67R/94R, 14PT132A/50B/50R/75R, 14PT133A/162R,
14PT-137A/162R, 14PT-138A/54R/58T/67R/71R/74R/75R/93S, 20PT-188A/50B /
67R/73R, 20PT-120A/78R, 20PT-132A/75R, 20PT-137A/62R,
20PT-38A/50D/58R/58H / 67R/71R/73R/74R/75R/94R/97R
login - Close contacts M24 and M25 on the circuit board (PCB).
Exit - STAND-BY

Chassis L7.2A 21PT2622/69R
login - Short jumper service points M28 and M29 (mass)
output - STAND-BY

Chassis L9.1E, L9.2A 14RT2665/00 21PT1354/58C 21PT1654/58 21PT3882/59R 25PT5307 Proc. SAA5542
Log into the service menu ( mode SDM ) (0) (6) (2) (5) (9) (6) (MENU); continue to enter the geometry (SAM mode)
Simultaneously press "VOL -" and "PR -" panel TV. Attention! in SDM AS
OFF function does not include, and then (perhaps) your TV will stop
working.
output - (STANBY)

Chassis L01H.2E/ AA 14HT3304/01, 21HT5404/01Z prots.TDA9552E remote-PC2882
login
in the service - 024,995 062,596 + or MENU button (i), there is a way
to enter the service, short circuit jumpers 9631 and 9641, and then
switch on the TV POWER button

Chassis MD1.1 E 25pt4301, 25PT4501/60 Processor TMP87CM36N-3270
1. Close the control points S42 S43, TV will enter SDM mode and displayed on the screen-SER-0
2. click on the local keyboard simultaneously MENU + P-TV will enter SAM modeIf no errors and failures in the top row will be zero. Changes are saved automatically.
output - POWER OFF on the remote.

Chassis MD1.2 E
21PT440B, 21PT441B/02, 21PT442B, PT4403, 21PT4422, 24PW6302, 24PW6322,
25PT5403, 25PT45, 25PT4523, 25PT5302, 25PT5322, 25PT5403, 52TA4311
login
- To close at S42 S43 SPP. Service mode to adjust. Entry: At the
service console model RC7150 press ALIGN with the button MENU i (-).
Exit - POWER OFF

Chassis MD2.22 E 25PT8303
login - Simultaneously press (?) And (SLEEP) under the lid.
Exit - POWER OFF

Chassis MG3.1E 28PW9525 28PW8806 28PT7306/58
Dial a remote combination. Then press (MENU) or (i +).

Chassis TE1.1E 14PT1347/01, 14PT1547/01, 20PT1547/01, 37TA1437/03, 37PTB1347/19.
login - On the remote control to click consecutively numbered buttons 062,595, and a button i +
output - Switch the TV into standby mode with the remote control button STBY or off the power button.

Model 28PT4456/00 Proc. SAA5564PS/M3/0/81
Login
in the service - to close the contacts: (GND) and (SMD - servise mode)
and turn on the TV to the network in 5-15 seconds, and contacts.
الرجوع الى أعلى الصفحة اذهب الى الأسفل
MSA
مشرف عام
مشرف عام


عدد المساهمات : 542
تاريخ التسجيل : 16/06/2010

مُساهمةموضوع: رد: سرفس مود - PHILIPS   الخميس مايو 05, 2011 10:25 pm

PHILIPS EM2E Chassis
SM 3122 785 10310

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]




الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
سرفس مود - PHILIPS
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: