أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا
أشرف عثمان للإلكترونيات
هل تريد التفاعل مع هذه المساهمة؟ كل ما عليك هو إنشاء حساب جديد ببضع خطوات أو تسجيل الدخول للمتابعة.


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةأحدث الصورالتسجيلدخول
بسم الله الرحمن الرحيم اللهم صل وسلم وبارك على سيدنا ونبينا محمد صل الله عليه وسلم الرجاء من الجميع الدعاء لمدير الموقع بالرحمه والمغفره.

سبحان الله وبحمده .. لاحول ولاقوه الا بالله..لا اله الا انت سبحانك اني كنت من الظالمين .. اللهم صل وسلم وبارك على سيدنا ونبينا محمد صل الله عليه وسلم
https://m.youtube.com/c/ashraf5914?reload=9&reload=9

 

 سرفس مود - ORION

اذهب الى الأسفل 
2 مشترك
كاتب الموضوعرسالة
MSA
مشرف عام
مشرف عام



عدد المساهمات : 541
تاريخ التسجيل : 16/06/2010

سرفس مود - ORION Empty
مُساهمةموضوع: سرفس مود - ORION   سرفس مود - ORION Emptyالخميس مايو 05, 2011 10:17 pm

model CTV222M percent. TVPO2066-A41
Login - Briefly close the 15 and 23 feet KR1506HL1 in the remote RS-4. Save settings: ->.<-
Installation of the service:

model TV2180MK6 Proc. OEC6027A
login
1. On the TV to hold down the "VOLUME-up to the value" 0 ".
2. Turn off your TV via the mains button.
3.
Click on the front of the press "VOLUME-, not releasing it on the
remote control press" 9 ", not letting them turn on the TV and press the
power button on the front panel button" STAND BY ".
The menu consists of two sub-menus.
Selecting
sub-menu items by pressing the appropriate "license" klavish on the
remote. Adjustment parameters are the keys "VOL-/ +" or "-SET +" button
on the RC. The yield of the items in a submenu, as well as the
transition from one submenu to another made the same combination:
"VOLUME-" and not releasing, press the remote button "9".
Exit - Produced by selecting the "8" in any menu or by pressing the "POWER".

chassis 7000 7300 ORION LIFETECH LT-7500 percent uP83C055
login - Turn on the TV, holding the button (MENU).
Press (SAT) SA-audio stereo adjustments, LA-audio level adjustment, HSH-horizontal shift
EW-horizontal
amplitude, PW-parabola correction, TC-corner parabola correction
VAM-vertical amplitude, VSH-vertical shift, SC-vertical S correction
WPR-white balance correction, WPG -'', WPB - ", DLY-Luma chroma delay
output - (TV)

Chassis DIGIT2000 ORION KENDO UNIVERSUM 6325, 6325VT percent. CCU2030
login
- With the remote control from the TV horizon without graphics click
"SERVICE", the indicator will show the CH, press it paz - there will be
OP, on volume select number of registers (1-4) and tsifipkami (1-9) to
change bits. After clicking the "Memory"
output - (TV)

Chassis BS990 CT63S92, CT71S92, FT5916 Proc. TVPOSM90.02/03
login - Press the button on the TV (OSD) (P-) (VOL-) and turn the power switch.

Chassis - TM8402A TV1470MJ percent. OES6047V videoprots. TB1226CN
login - Must be pressed simultaneously on the remote (9) and on TV (VOL-)

model PLT7051 LCD 7 percent MTV512GMV, video T100A FP3797-1/3506TLDA2
login - Turn TV dezh.rezhim, and remote dial CH-→ CH + → CH-→ MENU

model MP2927U. Proc. odnokristal VCT 3833, the sound MSP3413G
login - Press quickly "headphones" "--/--", "headphones", "timer" - directly into the service menu.
Twice
the "menu" - geometry. "P + P", changing the parameters, "VOL +, VOL-",
change the value. Save the "OK" immediately after the change.
Exit - Select "EXIT", press "OK".

Chassis PCB8500 TV82301 Proc. SAA5667HL video. VSP9402
login - Press "MENU" button on the front of the TV and hold enable network button.
output - Click the "ST-BY"

model MP2121U percent. SDA555XFL. videoprots. M61208
login - Press the button ->.<- (two arrows meet separated by a horizontal bar), or simply FIX.
There are four inputs, depending on what needed to 9871,9872,9474,9373. FIX button to click to each set of digits.
Exit - 2 times MENU.


الرجوع الى أعلى الصفحة اذهب الى الأسفل
MSA
مشرف عام
مشرف عام



عدد المساهمات : 541
تاريخ التسجيل : 16/06/2010

سرفس مود - ORION Empty
مُساهمةموضوع: رد: سرفس مود - ORION   سرفس مود - ORION Emptyالخميس مايو 05, 2011 10:18 pm

Orion
Processor: SAA5297PC/262 SEI.4400 3.0
Video: TDA8844 2Y

Input: (On TV) + (MENU) on the TV + (STBY) button on the RC
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام
أشرف عثمان


الأعلام : سرفس مود - ORION Male_e10
عدد المساهمات : 2402
تاريخ التسجيل : 16/06/2010
العمر : 63

سرفس مود - ORION Empty
مُساهمةموضوع: رد: سرفس مود - ORION   سرفس مود - ORION Emptyالخميس يوليو 21, 2011 3:08 am

ORION

MITSUBISHI CT-21M5E \ ET \ RT, CT-25M5E \ EN \ ET \ ETN \ RT \ RTN
:
Input: 1. Hazhat on sepvisny pepeklyuchatel S701 (Close to tyunepom)
then knopky 9 (in the limits of 5s). "*" - Pepeklyuchenie pegylipovochnogo
display, "2" - "8" - pegylipovka code "6" - "4" - pegylipovka data "0" - write to
memory, "1", or undo changes to records in memory. Output: stand by. Button TV / AV - out of
those modes. menu.
TUN 1 (0) - ranges of UHF, VHF
HTL 1 (0) - disabling the buttons "INSTALL"
TXT 0 (1.2) - 1 - Teletext incl. 2 - OFF
MNP - press "*" - entry in the settings menu
AVI 0 (1.2) - inputs AV: 1,2 - is
SYS 0 (1,2,3) - standard color (it should be SYS 1 or SYS 2)
STD 0 (1,2,3,4,5) - Standard audio (must STD 3)
Button TV / AV - Exit those. menu.
* * *
MITSUBISI CT-29B3EEST
Log in to the service menu: Turn
food. Using a small screwdriver to press the microswitch S701,
Located next to the antenna. And then on the remote control button 9
for 5 seconds. Record - button 4. Buttons 2 and 0 code change control buttons 5 and 7, change
data value.
* * *
TV ORION. Model NR TV-798
chassis
unknown. The board BEKO ELEKTRONIK U99.190 inscription. Processor TDA9563H/N1/31 K2J597 Y36919.Y1 FM-10p.
Entering the service menu: contrast with the negative control RC5,
(The universal Mak 2000, dial code 1041) to include in the service PAL NO SSTD BG + DK, SECAM and sound OK!
Remaking 0.22mkF capacitor 8 to ground and to change the IF filter.
* * *



عدل سابقا من قبل أشرف عثمان في الخميس يوليو 21, 2011 3:20 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام
أشرف عثمان


الأعلام : سرفس مود - ORION Male_e10
عدد المساهمات : 2402
تاريخ التسجيل : 16/06/2010
العمر : 63

سرفس مود - ORION Empty
مُساهمةموضوع: رد: سرفس مود - ORION   سرفس مود - ORION Emptyالخميس يوليو 21, 2011 3:13 am

TV ORION SPP2115s,
EPROM - 24C08A,
CPU-TDA9381PS/N3/3, CD2537, CD3042, STAFF LA-78 040, FBT-BSC24-2422DK.
Entering the service menu: Control Universal:
MAC2000, select code 1051. Push-MENU. Save-OK.
* * *
ORION195C6PC00ECF011A, pamyatS24C08AD35, videoprots.STV2246.
Minus the TV sound and 6 on the remote (ORION), to establish sound 1D = 41, 21 = F8 sekam.
ORION NR TV-798 AIWA TV-A215, TV-C142
Bx. in service: less contrast with the remote RC5, (Mak 2000, code 1041)
service in PAL NO
SSTD BG + DK
SECAM and sound OK!
adaptation capacity 0.22mkF 8 feet on the case and IF filter.
* * *
ORION T2157/67/97
(Percent LC863328A-5W63); T2567/97, ​​T2967/97 (проц. LC86328A-5W63); chassis STANDARD:
1. In the "STAND BY" press "RECALL" on the remote.
2. Pressing "VOLUME <" on the front of the TV set the volume level to "0".
3. Hold down the "VOLUME <", repeatedly press the "RECALL" on the remote.
* In case of default of paragraph 1. , Entry into service with the fifth attempt .*
The service menu is divided into four sub-menus:
S E R V I C E
FACTORY _____trenirovka
B / W White __________balans
ADJUST_______regulirovka
SETUP ________ustanovka system constants
Select submenu by pressing the "RECALL" on the remote.
* In case of default of paragraph 1. , The choice of sub-fifth pressing "RECALL" on the remote control .*
Access to adjusting the parameters of the keys "VOLUME ". Selecting and setting parameters
carried the keys "P + / P -" and "VOLUME ". All values ​​are stored automatically.
Exit the service menu - pressing the "POWER".* * *



عدل سابقا من قبل أشرف عثمان في الخميس يوليو 21, 2011 3:22 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام
أشرف عثمان


الأعلام : سرفس مود - ORION Male_e10
عدد المساهمات : 2402
تاريخ التسجيل : 16/06/2010
العمر : 63

سرفس مود - ORION Empty
مُساهمةموضوع: رد: سرفس مود - ORION   سرفس مود - ORION Emptyالخميس يوليو 21, 2011 3:14 am

ORION TV2180MK6
(Percent OEC6027A (TMP87CH37N3194-9901H)): On the front of the TV, press and hold
press "VOLUME <" to "0" and then not releasing it, press the button on the key "9".
The service menu is divided into two sub-menus.
First:
1. CUT OFF
2. AGC
3. V. SIZE
4. BRIGHT
5. COLOUR
6. TINT
8. END
Second:
1. AUTO
2. SUB BRIGHT AUTO
3. VCO AUTO
4. AFT AUTO
5. VCO
6. AFT
7. CONTRAST
8. END
Selecting items in the submenu by pressing the appropriate "license" keys on the keypad.
Adjusting the keyboard is "VOL " Or "- SET +" button on the remote.
The yield of the items in a submenu, as well as the transition from one sub to another is the same
combination: "VOLUME <" to "0", holding it press the button on the key "9".
All values ​​are stored automatically.
Exit the service menu is by selecting "8." in any sub-menu or by pressing
press "POWER".
TV: OSD, P-, VOL-and turn the power switch
Orion Lifetech. LT-7500 (chassis 7000, 7300).
Turn on the TV, hold down
MENU. Exit: TV
* * *



عدل سابقا من قبل أشرف عثمان في الخميس يوليو 21, 2011 3:22 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام
أشرف عثمان


الأعلام : سرفس مود - ORION Male_e10
عدد المساهمات : 2402
تاريخ التسجيل : 16/06/2010
العمر : 63

سرفس مود - ORION Empty
مُساهمةموضوع: رد: سرفس مود - ORION   سرفس مود - ORION Emptyالخميس يوليو 21, 2011 3:16 am

Apparatus Orion SPP2122F
Made in Ukraine "kitaeznom" chassis. Microprocessor:
8851CPNG6N59, quartz ZQ - 8MHz,
Memory EEPROM - TU24C08CPF, HOT - TT2190, SANYO IC: LA79107NV,
FCC unit LONGSIGN EWE-1053-V 2K80116C, Switch AV - 4053,
HR chip - STV9302B, TDKS - BSC 25N-0818 (BSC 25-0286GAS),
ULF - CD7522CS, similar to the power module chassis 3u01 (trehtranzistorny)
and analyzed in the subject line: "Processors (chassis 3Y01) LC863hhh"
Entering the service menu:
1. volume to remove the "0"
2. At the same time put pressure on the local keyboard, "VOL-" on the remote control DISP (rectangle with "+").
3. Exit - Menu on the remote.
MAK MAXIM (2007) "speaks" 1:1 (full line of buttons) on code 1377 -.

* * *
CTV222M
Enter the service mode: Short closed on 15 and 23 feet in the remote KR1506HL1
SS-4. Save Settings: ->.<-
Installation of the service:
OPTION1 OPTION2 OPTION3 OPTION4
1: ON 1: OFF 1: ON 1: OFF
2: ON 2: OFF 2: OFF 2: ON
3: ON 3: ON 3: ON 3: OFF4: OFF 4: OFF 4: OFF 4: OFF
5: OFF 5: ON 5: OFF 5: OFF
6: OFF 6: ON 6: ON 6: OFF
7: OFF 7: OFF 7: OFF 7: OFF
8: ON 8: ON 8: OFF 8: ON
Exit: POWER OFF
* * *
Chassis 7000, 7300, LT-7500

Turn on the TV, hold down the (MENU). Press (SAT)
SA-audio stereo adjustments, LA-audio level adjustment, HSH-horizontal shift
EW-horizontal amplitude, PW-parabola correction, TC-corner parabola correction
VAM-vertical amplitude, VSH-vertical shift, SC-vertical S correction
WPR-white balance correction, WPG -'', WPB - ", DLY-Luma chroma delay
Exit: TV
* * *


عدل سابقا من قبل أشرف عثمان في الخميس يوليو 21, 2011 3:24 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام
أشرف عثمان


الأعلام : سرفس مود - ORION Male_e10
عدد المساهمات : 2402
تاريخ التسجيل : 16/06/2010
العمر : 63

سرفس مود - ORION Empty
مُساهمةموضوع: رد: سرفس مود - ORION   سرفس مود - ORION Emptyالخميس يوليو 21, 2011 3:18 am


TV ORION TV2180MK6

(Processor OEC6027A
(TMP87CH37N3194-9901H)). Entering the service menu: On the front of the
TV push button and hold''VOLUME <''to the value''0'', then it does
not hold, push button on the key''9''.
Menu service menu consists of the two.
The first submenu:
1. CUT OFF
2. AGC AGC
3.razmer vertically V. SIZE
4. Brightness BRIGHT
5. Color COLOUR
6. TINT
8. END
The second sub-menus:
paragraph 1. AUTO
paragraph 2. Subyarkost SUB BRIGHT AUTO
3. VCO AUTO
Item 4. AFT AUTO
5. VCO
Item 6. AFT
7. CONTRAST contrast
8. END
The election takes place items on the menu by pressure''license''
appropriate keys on the keypad. Adjusting the keys committed''VOL ''or''- SET +''on the remote.
Exit sub-menu of items, as well as the transition from one menu to
second is the same combination:''VOLUME minus''to the value''0''is not pressing on the remote control push button''9''.
All values ​​are stored automatically.
Exit menu item of service is the election of''8''in each sub-menu, or pressing buttons''POWER''.

* * *

TV ORION T2157/67/97

(CPU LC863328A-5W63); T2967/97, ​​T2567/97 (CPU LC86328A-5W63); STANDARD chassis.
Entering the service menu:
1. In the''STAND BY''push button''RECALL''on the remote.
2. by pressure buttons''VOLUME <''on the front panel TV volume set to''0''.
3. Holding the button''VOLUME <'', press the button on the remote control again''RECALL''.
* In case of default of the first paragraph, the entry into service with the fifth attempt .*
Menu service menu consists of four:
SERVICE mode
1.FACTORY _____trenirovka
2.B / W __________balans white and RGB
3.ADJUST_______regulirovka options
4.SETUP ________ustanovka system constants
Preference menu by pressing the buttons''RECALL''on the remote.
* In case of default of the first paragraph, fifth sub-menu selection pressure on the remote control keys''RECALL''.*
Access to adjusting the values ​​of buttons''VOLUME ''. Election
and management options being implemented buttons''P + / P -''and
''VOLUME ''. All values ​​are stored automatically. Exit menu key service-squeezing''POWER''.

* * *


TV ORION 195C6PC00ECF011A,

video STV2246, pamyatS24C08AD35.
Enter the menu service: the TV sound and minus button on the six (ORION), exhibit 1D = 41 sound, 21 = F8 Secam.

* * *
TV ORION 346DC TV3350


Enter the service mode: pressure, holding the button on the toolbar "Menu",
the network to include. When the LED will shine red - the "Power" button on the press.


* * *


TV ORSON CT-2150S,

China TV (chassis 3Y01) - CPU LC863332B-53W3,
Remote control - 53W3 (54V3 applicable), video - LA76810A, MUSIC - D2624, key UPS - D1887.
1. Press MENU button and quickly recruit 8633.
2. Press MENU button and quickly recruit 8600.
3. Entering the service menu for LC863328-5W63, universal remote
Mak maXim code 1 3 7 9 press VOL-on TV to 0 on the remote control and Title.


الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
سرفس مود - ORION
الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1
 مواضيع مماثلة
-
» كتاب سرفس شامل أجهزة service-mode ORION
» AK1133-ORION-T2915
» سرفس مود - TAU
» سرفس مود - _LG
» سرفس مود - TCL

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: