أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةالتسجيلدخول
https://twitter.com/ashraf69osman--- https://www.facebook.com/ashraf.osman.73-- https://plus.google.com/u/0/+ashraf5914

شاطر | 
 

 service-mode -ONIKS

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
MSA
مشرف عام
مشرف عام


عدد المساهمات : 542
تاريخ التسجيل : 16/06/2010

مُساهمةموضوع: service-mode -ONIKS   الخميس مايو 05, 2011 4:57 pm

Onyx 54TTS12-22 Slim chassis PF2178H/4420
Processor - LA76936N-7N
RC - ES-21514C
Login in the service - a hidden button F (Factory) on the remote.
(MENU) on the remote control - selection page (ADJUST)
Clicking on the button (F):
1 times - "FACTORY"
2 times - "B / W BALANCE"
3 times - "ADJUST MENU 0"
4 time - "BUS OPEN"
5 times - Exit the service mode.

Onyx 14 "chassis KM060301-026942
Processor - NTDA9381C38NC
Onyx 54TTS12-06P chassis TC2106HUE
Processor - NTDA9381C38NC
Onyx 54TTS12-77P (06) Chassis F2177HUE
Processor - NTDA9381C38NC
Login in the service - click on the remote control buttons in the following sequence: MENU, 8, 5, 0, 0
Exit - Button "POWER" on the RC

Onyx 37TTS14-13 (14)
CPU - A8821
TV service mode by using the regular remote control
For login in the service menu to adjust the volume on the TV at least. On the remote control button (DIS). TV enters the service mode S.
Pressing the button (DIS) will translate the TV in service mode D.

Onyx 54TTS12-9 (10p)
Processor - 8851CPNG (EAS)
Login in service mode D-MODE.
Press
the D-MODE ON / OFF on a dedicated console. On the screen in the upper
right corner shows a letter D. Left in the upper right corner will be a
parameter and its value.
Login in service mode with a standard remote control.
Click
on the V-TV and set the volume to 00. Hold the button on the TV remote
control, press the button [_ +] On display in the upper right corner
shows a letter S (You are logged in the service mode S)
After completion of adjustment in the S mode for Released from it need to turn off the TV.
When re-entry procedure in the service mode you can enter in the most "complete" service mode D-MODE.

Onyx 54TTS12-15 chassis PF2118/FS2198 «CHA» Philips
Login
in the service - The TV set the volume to minimum. On the remote
control to press the MUTE button and holding it press the button on the
TV MENU.
To clear the memory in the service mode, press the button on the remote control 8.
Select
INIT. Use the PROG + set INIT BUSY. After 5 seconds, BUSY is cleared.
TV is off the network and turned on. Memory is cleared and ready for new
installations.
NOTE: When you click on the button 9 and the choice of INIT, all previously recorded values ​​in memory can be erased.
To initialize, press the 9 button on the remote.
Select the active state - 1.
Once again, store the required values.

Onyx 54TTS12-19, 36, 38, 98 chassis 21VM32
Service mode D.
1. TV service mode by using the regular remote control K10N-C10
2. For login
in the service menu to adjust the volume on the TV at least. On the
remote control to press the MUTE button and holding it press the button
on the TV MENU. TV enters the service mode D.
3. The buttons on the remote control:
GREEN - Select the option to adjust the DOWN
RED - Select the option to adjust the UP
YELLOW - Select a minus.
BLUE - Select a plus.
4.
When you click on the MUTE button on the remote control will be a
narrow strip on the screen needed to set the accelerating voltage.
5. When you press the button on the remote control P. MODE appears AFT and 5 seconds later appears AFT OK
6. When pressed on the remote control SLEEP button appears on the screen MENORY RECAL and all factory
installation reset. After this procedure, you must re-write the values ​​to

Onyx 54TTS12-30P chassis PF21300
Processor - TDA9384PS/N3/3
Onyx 54TTS12-91P chassis PF21S91
Processor - TDA9381PS/N3/3
Login in
the service - The TV set the volume to minimum. On the remote control
to press the MUTE button and holding it press the button on the TV MENU.
TV will go into service mode.

Onyx 63-84TTS11-19-80 chassis CH-10D
Onyx 63TTS11-19P chassis CH-10D
Onyx 63TTS11-86 chassis CH-10D
Onyx 72TTS11-19_80_86_99P chassis CH-10D
Onyx 84TTS11-80 chassis CH-10D
Login in
the service - Using RC K11 series. Set the "Volume" to a minimum. Press
MUTE on the remote control. Hold down the MUTE button press the MENU
button on the TV until the red symbol S appears on the TV screen.
After
the TV input to a service mode, press CAL on the remote. Press the MENU
I choose or I needed to adjust the setting. Press the MENU ---- or ----
set the required settings.
Rotating core of L 066 to set the optimal size of the menu on the TV screen.
Exit - Off. TV.

Onyx model 2519, 2910 Chassis CH-10
First
of all go to the regime SERVICE. Then, by pressing the «Cal» key on the
remote control, change the set. Each press on the remote control button
"MENU ↑» or "Menu ↓» will change positions in the selected page.
Clicking on the remote control button "MENU →» or "MENU ←» will be
accompanied by changes in the parameters of the selected position. By
pressing the remote control or turn off the TV receiver box to exit the
service mode.

Onyx 63TTS11-15P chassis «CHA» Philips
Login
in the service - The TV set the volume to minimum. On the remote
control to press the MUTE button and holding it press the button on the
TV MENU.
Memory initialization.
To clear the memory in the service mode, press the button on the remote 9.
Select
INIT. Use the PROG + set INIT BUSY. After 5 seconds, BUSY is cleared.
TV off. from the net and incl. Memory is cleared and ready for new
installations.

Onyx 63TTS11-91 chassis PF29E91
Processor CH08T0605 / 8827CSNG5BKO
Onyx 72TTS11-18 chassis PF29E91
Processor CH08T0605 / 8827CSNG5BKO
Onyx 84TTS11-15P chassis PF3415E
Processor CH08T0605 / 8827CSNG5BKO
Onyx 84TTS11-96 chassis PF3415E
Processor CH08T0605 / 8827CSNG5BKO
Entrance
in the service - should be on a TV set volume to minimum. On the remote
control to press the MUTE button and holding it press the button on the
TV MENU. TV enters the service mode D.

Onyx 63TTS12-15P chassis PF2118/FS2198 «CH» Philips
Processor TDA9384PS/N3/2/1615
Login
in the service - on the TV set the volume to minimum. On the remote
control to press the MUTE button and holding it press the button on the
TV MENU.
Memory initialization.
To clear the memory in the service mode, press the button on the remote 9.
Select
INIT. Use the PROG + set INIT BUSY. After 5 seconds, BUSY is cleared.
TV off. from the net and incl. Memory is cleared and ready for new
installations.

Onyx 72TTS11-06P chassis TF2906HU-HIS
Processor TDA9384/N3/3
Onyx 72TTS11-20 chassis TC2919HUE-HIS
Processor TDA9384/N3/3
Onyx 84TTS11-06P chassis TF3406DU-HIS
Processor TDA9384/N3/3
Onyx 84TTS11-20 chassis TF3419HUE-HIS
Processor TDA9384/N3/3
Login in service:
On a dedicated console, click VG2. In the upper left corner of the screen will display MUTE.
On a dedicated remote control, press M. In the upper left corner of the screen beech M.
On
a dedicated console, click LOGO. Appears on the TV logo. Press the P + /
P-establish the necessary letter and keys V + / V-choose familiarity
subject to revision.
Press button 1 on the remote. Appears on the TV MENU:
Press the P + and P-select option, and the buttons "Volume" Over / Under set the desired value.
Memory initialization.
NOTE: When you click on the initialization, all previously recorded values ​​in memory will be erased.
To initialize the menu bar, select INIT.
Select the active state --- 1.
Once again, store the required values.
To
exit the service mode, click on the dedicated remote control button on
the MI screen in the upper left corner will display MUTE. Click on the
specials. Remote control button VG2, TV out of service mode.

Login a service by using the user remote control.
Click the series with a slight pause on the remote MUTE, CALL, 9, 8, 0
Exit - POWER OFF on the remote.

Onyx 72TTS11-90 chassis CJ20A
Processor A8821
Login
in the service - on the TV set the volume to minimum. On the remote
control button DIS TV will enter the service mode S. Pressing the button
DIS translate TV in service mode D

Onyx 84TTS11-90 Chassis CTV-5 «CANCA-THOMSON»
Login
- Press the button on the remote SERVICE. Appears on the TV table 1.
Press the P + / P-select parameters to be adjusted, but the buttons V + /
V-set desired value
The transition between the tables - click on the OK button remote control
Note: to record changes of positions in the options, click the RR on the remote.
Exit - Button "PP" on the remote.

Onyx 97TTS15-98 chassis 5P60
Login - On the remote control to click on the queue button: CLOCK, PM, O
TV will go into service mode.
Buttons 0-9 select one of the tables to adjust the parameters.
Press PROG + and PROG-select the line to adjust
Press the VOL + and VOL-set desired value
Exit the service mode - press the (+) button on the remote.

Onyx 97TTS15-99 Chassis 5N11 & 5N07 SKYWORTH (PANASONIC)
Login in service mode.
1-1. There are two variants of initialization EEPROM.
A.
Press the buttons simultaneously VOL + VOL - on the TV and turn on the
TV. Then press the "MENU" button to switch to code option (Option Code).
Appears on the TV image:
1 2 3 4 5 6 7 8 9 A (red)
* * * * * * * * * * (Green)
B. Once the TV is on, press the button «factory», then press "MENU" button.
In the center of the screen there will be ten numbers (Option Code Menu).
1-2.
Press «PM» and «SM» on the control panel simultaneously until «INITIAL
PART OK» (which means the memory, the former partially initialized.
Repeat several times, if the picture has no changes

Onyx 97TTS15-99 Chassis 5N11 & 5N07 SKY (PANASONIC)
The remote control must be further developed
1.
Install an additional button NO contact 11 and 27. This button is
called SCREEN and serves to set the accelerating voltage on the CRT.
2. an extra button open contact 14 and 27. This button is called FACTORY and serves to convert the TV into service mode.
There are two variants of initialization EEPROM.
Option A. In the modified remote control button FACTORY.
Option
B. Push buttons simultaneously VOL + VOL-on the TV and keeping them
down the turn on the TV network button on the TV. After several seconds
appears on the TV MENU
RF AGC (AGC level) --------------------------- 45
VIF DET NEG (LEVEL DETECTOR) -------------- 2D
RGB LIMIT (BRIGHTNESS MENU) ----------------------- 7
BLUE BACK (BLUE SCREEN) ----------------------- ON
OSD.H (POSITION MENU) ---------------- D
Use
the PROG + and PROG-on remote control select line subject to
adjustment, and by pressing the VOL + and VOL-set desired value.



الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
service-mode -ONIKS
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: