أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةالتسجيلدخول
https://twitter.com/ashraf69osman--- https://www.facebook.com/ashraf.osman.73-- https://plus.google.com/u/0/+ashraf5914

شاطر | 
 

 سرفس مود - Erisson

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
MSA
مشرف عام
مشرف عام


عدد المساهمات : 542
تاريخ التسجيل : 16/06/2010

مُساهمةموضوع: سرفس مود - Erisson   الثلاثاء مايو 03, 2011 8:46 pm

ERISSON S-14N7A
Chassis 3P51
CPU: TDA9381PS/N3/3/2009 CK1146

There are two options for entry into service mode:
1. Press SM, DISPLAY, and I / II.
2. Press the Clock, PM, and a button timer.
Exit: - DISPLAY

ERISSON 21UF20
Chassis 3P61
CPU: TDA9384PS/N3/3

Log into the service mode: telly translate into English, and then sequentially pressing MENU, PP, SS, SLEEP.
Exit: - DISPLAY.

ERISSON 2120, ERC 21NI60
Chassis 3S10
CPU: ST92185BN4B1/PBI 3S10B-ENG/RUSS

Log into the service mode: Menu - AV - ANAL
OK - selects the submenu
Exit: - PP (in some network-button)

The second option log-in service: - double-click on "MENU" button until the screen "PICTURE MENU", then click "Q. VIEW" and "MUTE".
TV will go into service mode MENU 1. To move to the next menu (MENU 2) press "TIMER".
Exit: - MENU

ERISSON chassis 3Y01
Log into the service mode:
Double-click
the "MENU", wait until you get a "PICTURE MENU", then click "Q. VIEW"
or "RETURN", "MUTE". TV has to enter in service mode. Press the "TIMER"
to enter into the next service menu. This means that you entered the
"MENU 3.
Choose RF. AGC by pressing the "CH +" or "PROG +" and "CH-" or "PROG-". Adjust the "VOL +" and "VOL-" to get 4V when measured with a digital voltmeter.
Exit: - MENU

ERISSON CTV-1422 PN, CTV-2012, CTV-2120
Chassis: 3Y01/4Y01
Log into the service mode:
1) Double click "MENU" button on the remote control - displayed on the screen «PICTURE MENU»;
2) Repeatedly press the "Q. VIEW" and "MUTE" - appears on the screen «FACTORY MODE»
3) To move to the next menu, press "TIMER"
4) To move through the menu (adjustment parameters), press the keys "CH ±" or "PROG ±"
5) To change their values, click the button "VOL +" and "VOL-"
Exit: - MENU

ERISSON S14, 1465, 2105, 2106, 2120, 2150
Chassis 3Y11
CPU: LC863324A

Log into the service mode: - (MENU), (MENU), (Q. VIEW), (MUTE). Mode switching button (SLEEP)
Exit: - MENU

ERISSON 1406, 21F5, 21F10, 21SF10
Chassis 3Y18
CPU: LA76936Y 7N

Log into the service mode: Press the remote control - MENU - Q. VIEW - MUTE

ERISSON chassis 4S02
Log into the service mode: Successively press book. "SKIP", "VOL-", "AFT"
"PROG +", and "PROG-" - selection of the controlled parameter
"VOL +" and "VOL-" - adjusting the selected parameter
Exit: - PIC

ERISSON 2910
Chassis 5S01
CPU: ST63T88B1

Log into the service mode:
1) Turn off the TV the power button.
2) Press and hold the TV / AV button and MENU button on the TV, and at this time include the TV network button. Continue
to hold TVAV and MENU button until the TV still does not go down in
FACTORY MODE (on the screen will display "Vertical Amp. 50/60").
3) Press (PP) button on the remote control to save the settings and exit the Factory Mode.

ERISSON 2910A, 2102, 21F1, 2520, 2910, 2915, 2920, 25TI60, 2910A, 29SI60, 29TB65, 29TJ70, 34TJ70, 34TP75, CT-34DS9A
Chassis 5N11
CPU: S3C8849X30-AQB9 SKY-5N11-01

Log into the service mode: - press the "Factory" on the remote control once, and twice to enter the options menu.

ERISSON 14GX37A
Chassis 5W63
CPU: LC863320A 5R76

Log into the service mode: On the remote control press "RECALL", then press and hold on the local keyboard button "VOL DOWN" again to press "RECALL". This procedure is similar to pressing the "FACTORY".
To toggle submenus, repeat the procedure.
Exit: - STANDBY.

ERISSON 2910A, 2102, 21F1, 2520, 2910, 2915, 2920, 25TI60, 2910A, 29SI60, 29TB65, 29TJ70, 34TJ70, 34TP75, CT-34DS9A
Chassis 5N11
CPU: S3C8849X30-AQB9 SKY-5N11-01

Log into the service mode: Press the "Factory" on the remote control once, and twice to enter the options menu.

ERISSON 14GX37A
Chassis 5W63
CPU: LC863320A 5R76

Log into the service mode: On the remote control press "RECALL", then press and hold on the local keyboard button "VOL DOWN" again to press "RECALL". This procedure is similar to pressing the "FACTORY".
To toggle submenus, repeat the procedure.
Exit: - STANDBY.

ERISSON PF21GB300
Chassis ETE-2
CPU: TDA 9384PS/N3/3

Log into the service mode: Set the volume at "0", then successively press and hold the remote control "MUTE", then "MENU" on local keyboard.
Exit: - POWER on the remote.

ERISSON 21SF40
Chassis ETE-3
CPU: TDA11135

Log into the service mode: Set the volume at "0", then successively press and hold the remote control "MUTE", then "MENU" on local keyboard.
Exit: - POWER on the remote.

ERISSON 2103, 21F4, 21F5
Chassis MDY5
LC863532C-57P1

Log into the service mode:
1. Clicking three times on the button «MENU» go to the "Settings".
2. Press "P +" or "P" to select a row of "switching"
3. Dial the code "2483." TV should enter into a service mode menu «PAGE».
4. Switch on the menu pages «PAGE» by button «MUTE»
5. Entering the Setup Mode button is the accelerator - «TV / AV»
6. Switching the picture mode button P. MODE »
7. Balance adjustment: - pressing "1" and "4» - RB; - buttons "2" and "5» - GB; - the "3" and "6» - BB.
8. Adjusting subyarkosti SB - Button "7" and "8".
9. Switching the TV programs in the service mode is carried out on all the pages except the «PAGE2» "0" button down and "9" up
Exit: - MENU

ERISSON 1401, 21F2, 21F3
Log into the service mode:
1. Set the volume level to "0"
2. At the front of the TV press the "VOL-" button and simultaneously press
"DISP" button on the RC in the upper right corner of the screen character "S" (service mode)
3. By pressing the DISP button on the remote control out of service mode.
4. Set the volume level to "0"
5. At
the front of the TV press the "VOL-" and simultaneously press the
"DISP" button on the RC in the upper right corner of the screen
character "D" (advanced mode of service)
Output: Pressing the button "DISP" button on the RC.

ERISSON 14GX37A
CPU: LC863320A

Log into the service mode:
In the remote control to close pins 2 and 16. Each circuit takes in the various sub-menu, selecting the section: the buttons "up", "down" adjustment parameter: <>
Exit: - POWER, or by closing the 2 and 16 until the normal display screen. Effective for control of M / C SD7461GO, PT2416-103.

ERISSON 20LS01
CPU: TDA15521E/N1M80

Log into the service mode: MENU 1, 1, 4, 7

ERISSON 2102, 2503, 3410
CPU: S3C8849X15, S3P8849XZZ

Log into the service mode: In standby mode, press simultaneously "VOL +" and "VOL-" button and turn on the TV program or a remote control.

ERISSON 2102, 2103
CPU: S3P8849XZZ-AQB9

Log into the service mode: Close contacts 2 and 4 slots CN601. (ADJUST and GND), the message "KWTVA COMPUTER 11-23". Then click "OK" button on the remote. Menu appears on the "KWTVA SERVICE 11-23"
OPTION 5473176706

ERISSON 2105
Log into the service mode: Custom RC contains the ability to control the entrance to the service menu TV. Contact area is located in the lower left corner, but the button does not have a conductive coating.

ERISSON 2107, 14GX37
Log into the service mode: Similar models 2105, 2107 RC model (14GX37) contains the ability to control the entrance to the service menu TV. Contact area is located in the bottom row, second from left to right, but the button does not have a conductive coating.

ERISSON 2108
Log into the service mode:
Log in to the service from the service with the remote control or RC FUNAI MK11. To enter the service in MK11 native RC solder button between 2 and 16 feet m / s RT2461-103. Push button 1 times - on the screen: FACTORY; pressure. 2
nd time - on the screen B / W ADJUST (control regimes CRT), the third
time - ADJUST (geometry), 4 th time - SETUP (setup option), 5 th click -
out of service. Button "P" P + "" V-"" V + "- setting the values ​​in the options.

ERISSON 2103, 2190
CPU: S3C8849X15-AQB7

Log into the service mode:
1) In standby mode, simultaneously press the "VOL +" and "VOL-" button and turn on the TV program or a remote control. Without releasing the button, wait for the menu, a delay of up to 2 seconds.
2)
When the TV temporarily close the 2 and 4 legs of the service
connector, which is from the end servoprotsa, the screen will show the
title, and simultaneously press the OK button on the remote control. This will display a table service.
KWTVA ADLUST 11-23
OPTION
READ
CNT

ERISSON 2102, 3410
CPU: S3C8849X15, S3P8849XZZ

Log into the service mode:
change TV in standby mode, then simultaneously press the front panel
buttons "VOL + and" VOL-"button and turn on the TV" P + / - "or with the
remote.
Exit: - POWER

ERISSON 21UF70
CPU: 8897CSBNG6PR4 PA-09

Log into the service mode:
1) Set the volume level to "0"
2)
The front of the TV press the "vol-" and simultaneously press the
"DISP" button on the RC in the upper right corner of the screen
character "S" (service mode)
3) Pressing the button "DISP" button on the RC exit service mode.
4) Set the volume level to "0"
5)
The front of the TV press the "VOL-" and simultaneously press the DISP
button on the remote control in the upper right corner of the screen
character "D" (advanced mode of service)
6) Repeatedly pressing the "DISP" button on the RC exit service mode.

ERISSON 2520
Log into the service mode:
You
press the "VOL +" and "VOL-", the TV screen message should appear KWUAA
SERVICE, which represents the willingness of television to the settings
in service mode.
KWUAA SERVICE
Adjustment Option ********
Read 5198 CNT: X
Other Adj
Press "P +" and "P-" on the remote control used to select the desired mode.
Press the "VOL +", "VOL-" on the remote control is adjustable parameters.
To save data and exit the service mode, press the "OK" button on the front of the TV.

ERISSON 2910A
CPU: ST6-ELISA

Log into the service mode: Click on the TV front panel 3 button (AV / TV), (S. SYS), (MENU) and holding them turn on the network button.
Exit: POWER OFF

ERISSON
CPU: LC863322B

Log into the service mode: Press three times a hidden button in the remote control (the lower right).
Switching sections MENU holds key Mute - MUTE.
The remaining switching and selection of parameters (P +) and (P-), (Vol +) and (Vol-).
Twofold pressing a hidden button in the console (the lower right) - on the screen:
B / W BALANCE
S-BRI - 76
When you press the keys in this case MUTE - a thin horizontal band centered on the screen to adjust the geometry.
Exit: - hidden button remote control (the lower right).

ERISSON 2910, 2520, 29SI60
Removing the "protection of children"
The 'Child Protection' button controlled «SUB Pag». Pressing
the button once will display only the current channel (without the
possibility of changing the channel), all buttons except the «STAND BY»
and «SUB Pag.» Blocked.
Pressing
the «SUB Pag» repeatedly blocked all the channels on the screen to see a
blue box, with all the buttons except the «STAND BY» and «SUB Pag.»
Blocked. Pressing the «SUB Pag» for the third time, all locks are removed.

ERISSON 25TI60
Unlock
Disassemble the console there is a button (SUB.Page), the button is not enabled, press it 3 times - all locks will be removed.

ERISSON V21F2
Removing the "protection of children"
On the remote control to click "OK" button and holding it press the "Standby". Castle put the same combination.




الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
سرفس مود - Erisson
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: