أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةالتسجيلدخول
https://twitter.com/ashraf69osman--- https://www.facebook.com/ashraf.osman.73-- https://plus.google.com/u/0/+ashraf5914

شاطر | 
 

 سرفس مود - BEKO

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
MSA
مشرف عام
مشرف عام


عدد المساهمات : 542
تاريخ التسجيل : 16/06/2010

مُساهمةموضوع: سرفس مود - BEKO   الثلاثاء مايو 03, 2011 8:07 pm



BEKO chassis 10.3
Log into the service mode: On the front panel TV to press two buttons UP / DOWN button and turn on the network.
Exit: Turn off the network button.

BEKO chassis 10.4
Log into the service mode: On the front panel TV to press two buttons UP / DOWN button and turn on the network.
Exit: Turn off the network button.

BEKO TVB-4216 chassis 11AK20
CPU: ST6387/F1O
Log into the service mode:
There are two options:
1. To enter the service menu must be made within 4 seconds to perform the login procedure. You need to click on the keyboard TV (VOL-) and with the remote control the following sequence of keys. (Prog), (-), (TV). Options selected buttons (PROGRAM UP) (PROGRAM DOWN), and the change (VOL-), (VOL +). To store, press the red button. Exit (TV)
2.Na remote push-clock timer, and click on the TV at the same time P-, P +.
To confirm the change of values ​​- need to press the white button.

BEKO chassis 12.1 NR7GN
CPU: ST6387B/FL1
Log into the service mode: Input from remote MAC code 1263, click 'saturation (+) "
Native RC below:
"1» VERT AM + vertical size
"6» VERT AM - vertical size
"2» VERT POS + centering frame
"7» VERT POS - centering frame
"3» L VERT - linearity of the frame
"8» L VERT + linear frame
"4» HOR POS + centering lines
"9» HOR POS - centering lines
"5» AGC +
"0» AGC -
"Stop" R GAIN +
"DISP" R GAIN -
"SUB" G-DC +
"REV" G GAIN +
"MIX" R-DC +
MAK "RADIO" B GAIN -
MAK "AV" R-DC -
After all the changes to remember the white button remote native sign > I < on the screen.
Output: the central green button native RC.

BEKO chassis 12.4/12.5
CPU: SDA5552 (5521) xxx
Log into the service mode:
1. PICTURE MENU
2. "9301" or "8500"
3. EXIT "0"
Remote MAC codes 1041 and 1097 to press the "contrast (-)"

BEKO chassis 12.6
CPU: SDA5535A049
Log into the service mode:
1.PICTURE MENU
2. "8500"
3. EXIT "850"

BEKO chassis 12.7
CPU: SDA5535A056
Log into the service mode:
1. PICTURE MENU
2. "9301"
3. EXIT "0"

BEKO chassis 12.8
CPU: SDA555XFL A014
Log into the service mode:
1.PICTURE MENU
2. "8500"
3. EXIT "850"

BEKO chassis 14.1
CPU: SAA5563
Log into the service mode: Close a chip RC legs 10 and 17. output is closed in the RC 10 and 17.

BEKO chassis 14.2
CPU: TDA9563
Log into the service mode: remote control RS-5 with a separate adjustable contrast - contrast (-)". Next on the menu of native remote control buttons "P +", "P".

BEKO chassis 16.1
CPU: ST92195C7B1/PFK
Log into the service mode in the absence of the native remote control:
1) Using the RC-5 or IRC81024 (the old "Horizon"), "contrast (-)". Go to the menu buttons to the native console "P +" and "P", changing the data "Vol +" "Vol-".
Exit with saving the "contrast (-)"
2) Remote Control Philips RC2591/92LP
Login: button (> I <) , it is also "remember"
Yield: Off TV.

BEKO chassis 20.2
Log into the service mode:
Log in to Mak Maxi 2002: Code = 1097, "the contrast on the menu (-)", native control, out of service" contrast (-) "
BEKO chassis 22.1 and 22.2
Log into the service mode: press I, then dial 8500
Yield: click TXT.

BEKO chassis C7
CPU: VCT49X3F PZ D5 000 (MN 8256-05)
Log into the service mode: - enter "9301" with remote control, from the main menu.
Exit: press TV / TXT on the remote.

BEKO chassis C8 (ZX8)
CPU: VCT-49XYF PZ D5 000 4384.57 Z2 F
Log into the service mode: - enter "9301" with remote control, from the main menu.
Exit: press TV / TXT on the remote.

BEKO Chassis E1
CPU: TDA9345PS3/N3/3l1736, TDA9345PS3/N3/3/1748
Log into the service mode: MENU 9301
Hotel - FEATURES MENU 4658

BEKO chassis L4
Log into the service mode:
In TV mode, press the MENU button and enter 9301
Exit: Press TV / TX

BEKO chassis U99.190
CPU: TDA9563H/N1/31
Log into the service mode: "the contrast (-) from the remote RC5.

BEKO TVB-5180
CPU: SDA30C263
Log into the service mode: MENU 4341



الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - BEKO   الثلاثاء يوليو 19, 2011 8:13 pm

BEKO

Beko
This is the entrance into service for Beko:
Option 1: Hold down the TV button (PROG-) (PROG +) turn on the TV
network switch.
Option 2: Close the remote control at the chip pins 10 and 17.
* * *
LG (BEKO 12.1/14.1)
on NN5099K
need to go into service. Login: close to the remote 10 and 17 feet mikruhi. You will see a menu.
Under Sound + or - keys to set BG + DK, exit again to close the 10 and 17 feet
* * *
S7/S8 gear
Log in to service in their native Beko chassis S7/S8 - MENU, 9, 3, 0, 1. Exit button TV / TXT.
Log in to service chassis S7/S8 with software for Grundika - i (menu), 8, 5, 0, 0. Exit
button TXT.
The service is every standard audio (B / G, D / K, I, L) with two options -
on / off.
* * *
BEKO E1
Log in Service: MENU 9301
* * *
BEKO K1
Log in to the service:
activate "Picture Menu"
press the code "9301" (press "0" to exit). To exit the service TV / TX button should be on the panel.
While working on the screen, the version and date programs are written on the bottom rightscreen.
* * *
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - BEKO   الثلاثاء يوليو 19, 2011 8:16 pm

BEKO L5A
Service menu are entered by pressing 9, 3, 0, 1 key on the remote control function when the image
highlighted in the Main Menu.
* * *
BEKO NR7Q
(11AK20M-6)
There are at ST6387B1/F1A chassis 11AK20M-6:
Consecutively for 4 seconds. TV VOL-click and then from the console:
PROG, -, TV (window)
Unprotect.
When it comes to the processor BEKO SDA20563xxxxx then walk into the
service and do any manipulation you come out of it.
* * *
BEKO. CHASSIS 14.2
Jumper from RC circuits 10 and 17 feet. Entering the Menu remote control RS-5
with adjustable contrast split - "Contrast -".
Then on the menu control buttons native "P +", "P".
Hold down the on the TV (PROG-) (PROG +) television network to include tumbler.
* * *
BEKO NR6B2
For chassis that needed remote service. You can go to Macau, with the code
1263 + pushing saturation, with the code 1313 in the button (green) store.
Preferences various buttons. Buttons 1 and 6, reg. V amplitude, 3i8 Reg. V linearity, 2 at (1263) V position +
Code 1263
Button Control
saturation. + Service
A Vamplit +
2 Vpozit +
3 Lin vert-
4 H pozit +
AGC + 5
6 V amplit-
7
8 Lin vert +
9 H pozit-
AGC-0
Mute Y zad-
B (green), starting Saturation
C (yellow), contrast Home
Loudly + Reset (factory settings)
The program - a system of color
Saturated. - Y zad +
AV R DC-
Kod1313
Button Control
0 G DC-
5 R gain +
6 G DC +
7 R DC +
R DC-8
G DC-9
P / C Reset (factory)
Prog + H pozit +
Loudly + V pozit +
B (green) STORE memorization adjustments
Brightness + AGC +
Us + Vamplit-
AV Yzad-



* * *

الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - BEKO   الثلاثاء يوليو 19, 2011 8:22 pm

For entry into service BEKO - TVT 28 162,
CPU
SDA20563-A512, the video processor TDA4680:
connect down the hold button "VOL +" and "CANNEL UP",
out-switching to standby mode. To balance podregulirovki
White push button on the remote control saturation, there
position is "AUTO WBALANSE", select it and automatically balance
established. To remember, tap "OK" button.
BEKO NR7KQ,
Service menu:
There are at ST6387B1/F1A on 11AK20M-6 Chassis:
Consistently for four seconds on TV to push VOL-, then with the keypad:
PROG, -, TV (window).

* * *
Protection removed.
If a BEKO question with an SDA20563xxxxx, then
service enter, engage in any manipulation of it and go out.
* * *
TV BEKO 14.1 chassis.
The service can be connected to the DC (and OIRT in this case) and the Cyrillic alphabet for TXT.
All along the navigation service is clear and needs no special explanation.
Log into the service menu using the remote service. Pressing on
button with the name of the same name --- the entrance to the service, click again --- out. Remembering automatic. But ....
If you have a remote service.
If not, then the command for this is BEKO produced by any control
RC-5 format (contrast "minus") and with direct access to operational adjustments.

* * *


عدل سابقا من قبل أشرف عثمان في الثلاثاء يوليو 19, 2011 8:31 pm عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - BEKO   الثلاثاء يوليو 19, 2011 8:24 pm

TV Bush DVD144RC
(Piece of British TV / DVD).
Chassis: GUW7.820.927. Microprocessor: TDA9381PS/N2/1I1198. Flashing (fourth row): SYBER (B).
Sound English only I, but the service may include sound
B / G, standard D / K, standard I, standard M.
Entering the service menu: - push two buttons INSTALL
at any distance from the chassis Phillips MD1.2, L6.2, MD1.1, L6.1, etc.
Distance from Philips is necessary that, where vyvodeniya menu
settings need to press two buttons at the same time, they were signed and INSTALL feature connected.
Entering the service menu: - two buttons to press INSTALL
on the remote control from Philips, the on-screen service information will appear.
Further distance from home to press Bush to Pr + the desired item
Service menu choose, to put pressure Gy + / Gr-value to change.
* * *
BRATZ 333 487 TV, TV + DVD.
Ingredients: CPU - M37160M8N-067, IC Remote Control - T3833-002.
Entering the service menu:
Jumper in the remote IMS 1.5 feet. The service can only enter with a new (clean) memory.
In memory of the old entrance will not work.* * *(TDA884x + SDA5255-052)
Entering the service menu: TV turn on from standby mode to go to work
and within 5 seconds. press sequentially "TV", "i", "STOP". (Well, it's not a secret).
Log in with a universal remote Mak Maxi 2002:
Dial code = 1273. The button "TV" = Rec / Erase. The button "i" = All buttons in the bottom two rows, for Teletext and Vydac.
Press Shift + MODE = exit in Picture Menu
Press Shift + H / V = ​​go out into the Sound Menu
I was just, somebody to speed (mudohayus myself frequently).
* * *
TV BEKO 12.6 CHASSIS.
PROCESOR: SDA5535A049.
1.Nazhimaem PICTURE MENU
2. Click the code "8500"
3.EXIT: Press "850"
* * *
TV BEKO 12.7 CHASSIS.
PROCESOR: SDA5535A056.
1. Click PICTURE MENU.
2. Press "9301."
3. EXIT Press "0".
* * *


عدل سابقا من قبل أشرف عثمان في الثلاثاء يوليو 19, 2011 8:30 pm عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - BEKO   الثلاثاء يوليو 19, 2011 8:26 pm

TV Saish.
Native scheme took on the occasion. The microprocessor in the scheme
LC863532, as it is written very TH-50J2 3QR3.
Under the scheme written LA76810 and in-kind costs LA76810A.
The scheme coincides completely! Consequently, unambiguous videoprotsy!!
Enter the menu service: recall on the remote and the volume (-) on the face TV.
(Not to be confused with the Recall display on the unit as Hitachi). There must be lighted Factory at the top.
Then select the button Mute turns the page service.
Set the resolution to SECAM. Now input signals are activated color difference. Exit the service menu is the same as the input.
* * *
TV BEKO 14272TDS model,
processor SDA5535 A071, Enter the service mode: - 1.
Log in picture menu, 2. Code to dial "9301", press release 3.For "0"
* * *
TV Beko t770vdnz100hz.
Below on the board za1.190-03 is written. Enter the service mode:
menu button and quickly push 9301, if slowly, it does not go!

* * *



عدل سابقا من قبل أشرف عثمان في الثلاثاء يوليو 19, 2011 8:28 pm عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس مود - BEKO   الثلاثاء يوليو 19, 2011 8:26 pm

Apparatus CAMERON 29SL40.
Enter the service mode - working in a mode to push MENU on the remote control

  • then press the Q. VIEW six or seven times. Switching sub-
service is being implemented in the menu button MENU or 0 - 9.
* * *
LCD TV Cameron 3207.
Enter the service mode:
1) VOL .- set to minimum. 2) Display in STANDBY.3) on the unit
press the button PROG. + and VOL. + and connect with a remote control button POWER.


الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
سرفس مود - BEKO
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: