أشرف عثمان للإلكترونيات
أهلا وسهلا بكم ونتمنى أن تستفيد معنا


schematic-VIDEO CASSETTE-monitor-service manual SHASSIS Panasonic Philips SAMSUNG SANYO SHARP SONY toshiba Aiwa AKAI DAEWOO Goldstar HYUNDAI VIDEO Grundig Hitachi JVC LG Mitsubishi National NEC ORION VESTEL Corus-Repair-Plasma-LCD
 
الرئيسيةالتسجيلدخول
https://twitter.com/ashraf69osman--- https://www.facebook.com/ashraf.osman.73-- https://plus.google.com/u/0/+ashraf5914

شاطر | 
 

 سرفس شامل أجهزة service-mode-HITACHI

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: سرفس شامل أجهزة service-mode-HITACHI   الأربعاء يوليو 20, 2011 12:17 am

HITACHI

HITACHI SERVICE
* * *
HITACHI 11AK19

TVs are assembled on a universal-type chassis AK19. This allows
use picture tubes with different screen size without making
significant changes to the scheme. TVs also use chips
controlled via I2C. This allows for adjustment televizo-
ra directly from the remote control without having to remove the rear cover.
Therefore, if the TV works, but it disrupted the consumer charac-
istics (change white balance, image size, image centering,
zheniya, etc.), it is necessary to try to adjust with the remote control.
5.1 Involvement adjustment mode
To enable the adjustment, press the blue button
remote control, while on the TV screen menu should appear USTA-
Novki the following:
INSTALLATION
Customize ...
PROGRAM ...
Configuration ...
Click the button in series 4, 7, 2 and 5, the remote control. You should
appear on the Tools menu of the following form:
SERVICE
ADJUSTMENT ...
OPTIONS ...
Inscription ADJUSTMENT ... should be highlighted in white letters on
blue background.
Press the "+" remote control, and it should enable
adjustment. On the TV screen should appear the inscription "ADJUST 00"
(Regulation 00) and the scale on which is indicated by the process of adjustment.
To the left of the scale of the numeric value of the controlled parameter (mo-
Jet vary from 0 to 63). Number of the controlled parameter is chosen in
power buttons "" or "" remote control. Parameter is controlled by
the "+" or "-" remote.
WARNING! Need to remember before adjusting the digital
value of the controlled parameter, since any change in its auto-
cally stored in memory. This is necessary in order to be able to ver-
nutsya adjustment to set the manufacture of television.
Exit control is performed by pressing the "TV".
5.1.1 White Balance Adjustment
Choose adjustable parameter "ADJUST 00", "ADJUST 01" or
"ADJUST 02". The purpose of these adjustments:
"ADJUST 00" - adjust the "red";
"ADJUST 01" - adjusting the "green";
"ADJUST 02" - adjusting the "blue".
By adjusting these parameters to achieve the white balance.
Adjustment must be performed on the signal "white box".
5.2.2 Adjustment of AGC
Choose adjustable parameter "ADJUST 03". This adjustment recom-
mended to perform to remove the back cover. To the antenna input tele-
tensor give the signal level of 60 dBmV (recommended frequency channel 12,
Recommended signal - "Color bars"). Digital voltmeter measured
rit voltage on pin 1 of SLE. The voltage should be 3.7 V. In the case of
need to put it, adjusting the value of "ADJUST 03". Verify
image quality when the signal 90 dBmV.
5.2.3 Adjustment of AGC-type PLL for SLE
"ADJUST 04" - to drive the negative modulation.
"ADJUST 05" - to drive the positive modulation.
These models are not used.
5.2.4 Adjusting the delay of the luminance signal
"ADJUST 06" - a delay of the luminance signal of PAL.
"ADJUST 07" - a delay of the luminance signal of SECAM.
"ADJUST 08" - a delay of the luminance signal of NTSC.
"ADJUST 09" - a delay of the luminance signal to another system.
Adjustment "08" and "09" is not used.
Adjustment is made at a signal, "Color bars" system
Topics SECAM and PAL, respectively. It is necessary to achieve the NAI-
sharper transitions (boundaries) between the colors.
5.2.5 Adjustment of vertical size (CRT only 110 °)
"ADJUST 10" - adjusting the size of the vertical for a CRT
Diagonal screen size of 63 and 70 cm Adjustments recommended conduction
dit on tap "UEIT" or "mesh field."
5.2.6 Centering the image vertically (for CRT
110 °)“
ADJUST 11 "- centering the image vertically to a CRT
Diagonal screen size of 63 and 70 cm Adjustments recommended pro-
drive on tap "UEIT" or "mesh field."
5.2.7 Alignment of the size of the horizontal format 4:3
"ADJUST 12" - centering on the size of the horizontal format for image-
zheniya 4:3. Acts in cases where in the image was established,
county option "image size" of 4:3. Adjustment is recommended
hold on tap "UEIT" or "mesh box"
"ADJUST 13" - linearity control vertical image for
aspect ratio of 4:3. Acts in cases where the menu images
of was set to "image size" of 4:3. Adjustment
recommended for the signal "UEIT" or "mesh field."
5.2.9 Adjusting the size of the vertical format 4:3
"ADJUST 14" - adjusting the size of the vertical format for image-
zheniya 4:3. Acts in cases where in the image was established,
county option "image size" of 4:3. Adjustment is recommended
hold on tap "UEIT" or "mesh field."
5.2.10 Adjusting the S-correction for 4:3
"ADJUST 15" - S-correction adjustment for aspect ratio of 4:3.
Acts in cases where in the image was set para-
meter "image size" of 4:3. Adjustment is recommended
on tap "UEIT" or "mesh field." Adjustment allows you to change
linearity of the image vertically.
05/02/11 centering the image vertically to 4:3
"ADJUST 16" - centering the image vertically to 4:3.
Acts in cases where in the image was set pa-
parameter "image size" of 4:3. Adjustment is recommended conduction
dit on tap "UEIT" or "mesh field."
5.2.12 Adjusting the size of the horizontal picture format
4:3 (only for CRT 110 °).
"ADJUST 17" - adjusting the size of the image horizontally to
4:3 (only for CRT with a screen size of dia-
estrus 63 and 70 cm). Acts in cases where in the image was
set to "image size" of 4:3. Adjustment recom-
mended to carry out a signal "UEIT" or "mesh field."
5.2.13 Adjusting the width of the parabola to the aspect ratio 4:3
(Only for CRT 110 °).
"ADJUST 18" - width adjustment of the parabola for the format of images
of 4:3 (for CRT with a screen size 63 and 70 cm).
Acts in cases where in the image was set para-
meter "image size" of 4:3. Adjustment is recommended
on tap "UEIT" or "mesh field."
5.2.14 Adjustment of the parabola at the corners to 4:3
(Only for CRT 110 °)
"ADJUST 19" - adjustment of the parabola at the corners for the format of images
of 4:3 (for CRT with a screen size 63 and 70 cm).
Acts in cases where in the image was set para-
meter "image size" of 4:3. Adjustment is recommended
on tap "UEIT" or "mesh field."
5.2.15 Adjusting the keystone to 4:3 (only for
CRT 110 °)
"ADJUST 20" - trapezoid adjustment for aspect ratio 4:3
(Only for CRT with a screen size diagonal 63 and 70 cm). The action of
exists in cases where in the image was set to
"Image size" is 4:3. Adjustment is recommended for
signal "UEIT" or "mesh field."
05/02/16 adjustments for aspect ratio 16:9
"ADJUST 21" - centering on the horizontal
"ADJUST 22" - Vertical linearity
"ADJUST 23" - vertical size
"ADJUST 24" - S-correction
"ADJUST 25" - vertical alignment
"ADJUST 26" - horizontal size (picture tubes for 110 degrees.)
"ADJUST 27" - width of the parabola (for the picture tube 110 degrees.)
"ADJUST 28" - a parabola in the corners (for the picture tube 110 degrees.)
"ADJUST 29" - trapezoid (CRT for 110 degrees.)
These adjustments apply to cases where the menu
image was set to "image size" 16:9.
These adjustments are not essential, since the transfer of form-
Volume 16:9 are not transferred. The value of these parameters
change is not recommended because of their proper setting can be
only with a special generator.

* * *



عدل سابقا من قبل أشرف عثمان في الأربعاء يوليو 20, 2011 12:40 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس شامل أجهزة service-mode-HITACHI   الأربعاء يوليو 20, 2011 12:19 am

HITACHI: C1422R, C14/2122T, CP14/20/2122R/T, CL2122R
... , Chassis: F1x, F2x, F4x, percent.: SAA5288/90PS.
In _tabl. 1 shows the model of TV, chassis, and used types of microcontrollers.
All adjustments are related to service mode, performed with a standard remote control
type FX700 RCHU or FX701 RCHU. Both have the same remote control button layout, but
different symbol buttons (one button on the remote symbol in the form of words, another - in the form
characters).
1) To activate the service mode jumper to close pins 2 and 3 of connector P701. Jumper
should be during the whole period of time adjusting TV in service mode.
Initialize memory EEPROM:
After replacing the EEPROM with a new, micro-controller automatically enters it in the initial
production values. This process takes a few seconds. If the
At each turn on the TV writing process in memory is repeated, it could mean that the chip
Memory is faulty.

  • Please click on teletext (UPDATE) _sm. Fig. 2 and hold it for as long as the TV does not

goes into standby (within three seconds). When you turn on TV will automatically
initialization procedure performed.
Adjusting the settings in service mode:
On the left side of the screen displays two numbers in hexadecimal code. The first number denotes
parameter number, the second - characterizes the actual value.Full list of available options, as well as primary production values ​​for different
diagonals of the CRT is presented in _tabl. 3.
! After setting a designated''1A''available next three parameters that instead of numbers
lettered:
Text Mode - Contrast Text.
Ex - Information (CPU) of the type of tuner: 00 - only for UHF, 01 - multiband.
AV - Information (CPU) of the nests used: 00 - SCART, 01 - SCART input, plus
phone.
Service adjustment:

  • Selection of parameters of buttons P + / - remote control or SELECT button on the keyboard of the local bar.
  • Adjusting the parameters button VOLUME + / -.
  • Storing all the settings made at the same time TV button the remote control.

After storing the on-screen message appears: STORED.

  • The power button and teletext button 0 in service mode, used for serial perklyucheniya
programs.

  • Button NORMAL (normalization) is to call the production values ​​of the controlled
parameter.

  • Numeric buttons 1 ... 8 can be used to switch individual bits installed




عدل سابقا من قبل أشرف عثمان في الأربعاء يوليو 20, 2011 12:41 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس شامل أجهزة service-mode-HITACHI   الأربعاء يوليو 20, 2011 12:21 am

values ​​(all values ​​are written in one byte).

  • Button 1 is responsible for the most significant bit. For example, if the displayed byte is equal to FF, the
After clicking on a byte value is changed to 7F (in binary notation this corresponds to
Change byte 11111111 to 01111111).
Mode self-test:
In case of failure, which can identify the controller, TV will automatically
switched to standby mode, and a glowing LED will flash. Fault detection
determined by the number of flashes (error number) LED _sm. Table. 2.
Additional information
Limiting the adjustment range of sound:
This function is active or disabled.
To include the following:

  • Click once on the _sm. Fig. 1
  • Use the - or + to set the nominal level of sound without any distortion.
  • At a time when more information OSD on the screen, press MUTE.
The confirmation of the operation that will correctly display the symbol Reg. Volume on the rightside of the scale.
To disable the repeat vkyucheniya.
The confirmation of the operation that will correct the disappearance of the character Reg. Volume on the right
side of the scale.
Exit from service:
Remove the jumper from the connector P701.
* * *
HITACHI C2160FS
. entry into service: turn on the TV power switch while holding
button TV \ VIDEO on the front.

* * *
HITACHI C2172MS
. Servise: press and hold button VOL-on TV set press power SW.
93 00
94 1F
95 00
96 1F
97 00
98 3F
99 1F
100 1F
101 00
102 1F
103 00
111 15
112 01
115 01
116 01
137 09
138 0B
139 0F
140 F2
199 00
303 03
202 00
203 00
204 FF

* * *



عدل سابقا من قبل أشرف عثمان في الأربعاء يوليو 20, 2011 12:42 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس شامل أجهزة service-mode-HITACHI   الأربعاء يوليو 20, 2011 12:26 am

HITACHI CL32WF720AN-300 (100Hz)
Chassi A-8
SERVICE MODE:
1.Nazhat menu on the remote.
2. Press VOL + and VOL - together under the front flap, and hold for 10 seconds.
HITAHCI chassis V3AR (JK08131A MCL-437F).
Pressing and holding the AV / TV TV panel pressing inclusion SW.
1
Most of the adjustment points in the chassis control V3AR IIC. Items include the video settings
chroma IC
(I001, PCM) control, audio Ics multiplex, horizontal and vertical deflection and others.
To begin the IIC adjustment, first turn the power switch. Press and hold the TV /
Video of local key, and then
press the power switch. Release both buttons after the following display appears on the screen.
NO DATA
001 : 28
002: 28 Select Settings on the items or the cursor
003 : 28
004 : 80
005 : 80
006: 06 Select Settings on the items or the cursor
007 : 75
: Alignment
RECALL: save
To select items (eg, RGB level, sub-GTC brightness ...), or press the cursor button
Remote control. To modify the data of the selected item, press the mouse Bitton or on the remote control
phone
After completing the adjustment, press the RECALL button on the TV remote control to store data.
Press MENU, button or turn the TV off before the end of the restructuring of IIC.

  • 11 -
The following are the IIC Bus Control and adjustment of data for reference.Table 1: IIC-Bus control and adjustment
Name of the restructuring of the initial data AFFECTED BY CHANGE
range of the data memory of CPT TDA9384/86/65
(hex) I002 I001
1 WHITE POINT R 00-3F 00 O O O
2 WHITE POINT G 00-3F 00 O O O
3 WHITE POINT B 00-3F 00 O O O
6 Позиция по горизонтали HORIZONTAL POSITION 00-3F 16 O O O
7 суб цвет SUB-COLOR 00-3F 1E O X O
8 SUB-TINT 00-3F 1E O X O
9 суб яркость SUB-BRIGHT 00-3F 1E O X O
10 суб контрастность SUB-contrast 00-3F 08 OXO
11 суб четкостьSUB-SHARPNESS 00-3F 1E O X O
13 PHASE 1 TIME CONSTANT 00-03 00 O X O
14 опознавание видео VIDEO IDENT MODE 00-01 01 O X O
15 FIELD FREQ. 00-03 02 O X O
Interlace 16 00-01 01 O X O
17 ENABLE FAST BLANKING 00-01 00 O X O
18 SYNCHRONIZATION 00-01 00 O X O
19 опознавание цвета COLOR MODE Decoder 00-0f 08 OXO
20 RGB BLANKING 00-01 00 O X O
21 BLACK CURRENT STABILISATION 00-01 01 O X O
22 уровень черного BLACK LEVEL OFF SET R 00-0F 00 O X O
23 уровень черного BLACK LEVEL OFF SET G 00-0F 00 O X O
VERTICAL MODE Divide 24 00-01 00 X25 поиск программ SEARCH TUNING MODE 00-01 00 O X O
26 опознавание видео VIDEO IDENT MODE 00-01 01 O X O
27 FORCED SLICING LEVEL FOR V.SY 00-01 01 O X O
29 ENABLE VERTICAL GUARD 00-01 00 O X O

  • 12 -
Name of the restructuring of the initial data AFFECTED BY CHANGE
Data Range MEMORY TDA9384/86/65
(hex) I002 I001
30 SERVICE BLANKING 00-01 00 X X O
NTSC MATRIX 00-01 31 01 O O X
32 PAL,SECAM/NTSC 00-01 01 O X O
33 BYPASS OF CHROMA BASE BAND DL 00-01 00 O X O
AVL 34 / 00 00-03 subcarrier O X O
2
35 SYNCHRONIZATION OF OSD/TEXT 00-01 01 O X O
36 AFC WINDOW 00-01 01 O X O
37 IF SENSITIVITY 00-01 00 O X O
39 Off Video VIDEO MUTE 00-01 00 OXO
40 AGC TAKE OVER 00-3F 20 O X O
47 PLL DEMODULATOR FREQ. 00-05 02 O X O
48 размер по вертикалиVERTICAL ZOOM 19 OXO 00-3F
50 SW-OFF V-00 00-01 OVERSCAN O X O
51 CHROMA BANDPASS C-FREQ. 00-01 00 O X O
54 позиция по вертикали VERTICAL SHIFT(V POSITION) 00-3F 28 O O O
55 размер по вертикали VERTICAL AMPLITUDE(V SIZE) 00-3F 1B O O
57 S-CORRECTION 00-3F 20 O O O
58 BLACK STRETCH 00-01 01 O X O59 VERTICAL SLOPE 00-3F 1B O O O
60 Горизонтальная трапеция HOLIZONTAL PARALLELOGRAM 00-3F 1B O O O
61 HOLIZONTAL BOW 00-3F 1B O O O
63 AUTO COLOR LIMITTING 00-01 01 O X O
64 IF AGC SPEED 00-03 01 O X O
66 CATHODE DRIVE LEVEL 00-0F 0F O X O
69 FAST FILTER IF-PLL 00-01 00 O X O
71 FORCED COLOR-ON 00-01 00 O X O
72 GAIN FM DEMODURATOR 00-01 00 O X O
73 SOUND MUTE 00-03 03 O X O

  • 13 -
Наименование перестройки НАЧАЛЬНЫХ ДАННЫХ, ПОСТРАДАВШИХ ПРИ ИЗМЕНЕНИИ
диапазона данных ПАМЯТИ TDA9384/86/65
(hex) I002 I001
74 окно выбора звука WINDOW SELECTION SOUND PLL 00-01 00 O X O
75 QSS OUT OR AM OUT 00-01 00 O X O
76 EHT TRACKING MODE 00-01 00 O X O
77 RGB/YUB SWITCH 00-01 00 O X O
78 RGB BLANKING MODE 00-01 00 O X O
80 V-SCAN DISABLED 00-01 00 X X O
106 EW WIDTH 00-3F 1F O O O
107 EW PARABOLA/WIDTH 00-3F 1F O O O
108 EW UPPER CORNER PARABOLA 00-3F 1F O O O
109 EW LOWER CORNER PARABOLA 00-3F 1F O O O
110 EW TAPEZIUM 00-3F 1F O O O
111 Y DELAY 00-0F 06 O X O
112 Y DELAY 00-0F 0A O X O
113 DISABLE 00-01 00 O X O
114 X-RAY PROTECTION 00-01 00 O X O139 A2 STEREO JUDGE> X 00-7F 0F O X X
140 A2 BILINGUAL JUDGE> X 80-FF F2 O X X
141 FM-AM SWITCHING 000-3FF 380 O X X
142 OUTPUT LEVEL OF NICAM 00-7F 7A O X X
143 OUTPUT LEVEL OF A2 00-7F 74 O X X
144 OUTPUT LEVEL OF FM 00-7F 75 O X X

  • 14 -
Delivery of the service mode IIC
(Applies only when the memory IC, I002, modified).
1. Select the restructuring, 323 (Initialzation memory IC, I002), clicking the cursor or
Remote control.
2. The data set point adjustment 323 to "01", or state, pressing the cursor on the phone a remote control.
3. Press RECALL on the phone a remote control to remember the details.
can not correctly copy the infusion 0vot how it happened

* * *



عدل سابقا من قبل أشرف عثمان في الأربعاء يوليو 20, 2011 12:44 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس شامل أجهزة service-mode-HITACHI   الأربعاء يوليو 20, 2011 12:29 am

HITACHI. C2556TN2
How to access the service.
TV brought from England to do "DK" is now only ihneya system. The front panel buttons (- Volume +)
and (- P +) and another button "Menu"
MCU: SAA5296GPHIT OSD VER1
K9V545
EEPROM: 24W16
EPROM: 27C512-VERSIA = 2R
Sound: TDA9800 - TDA9875
TDA8841 2Y
To enter the service:
MENU button to call the main menu, which looks at the positions
MAIN MENU
PICTURE
AUDIO
SOUND MODE
FEATURE
INSTALL
Then press the VOL + simultaneously and VOL - on the keyboard to keep the local and until there are additional menu
position.
MAIN MENU
PICTURE
AUDIO
SOUND MODE
FEATURE
INSTALL
SERVICE
EXIT SERVICE
Press the P + P - select the position of SERVICE, login to the service by pressing the VOL + or VOL -.
Log in to sub TUNER. There is a position of DK.
Exit Service Mode - Press MENU and the book will return to the main menu. Select the position EXIT SERVICE.
Confirmation of the book release VOL +.
Attention! In the submenu OPTIONS is the position of E2 FACTORY and E2 Shipping. First - it samoinitsializatsiya.
Second - this is the average of all the adjustments in the service mode. Be careful with these options.
* * *
HITACHI GA1
The setting of this model are governed by two different ways: by controlling the I2C busin the usual analog fashion. Adjustments to the I2C bus control include
only specified objects and variable data.
NOTE: Make sure the TV is in "good condition" before switching to the service for
adjustment.
1. Installation service mode by the microprocessor.
1 Short JA JA 137 & 138 for 1 second and release to move to the position of maintenance mode
and a microprocessor in the input mode. (Surgery through the I2C bus control). (Use
JWS installation as well).
2 Press the CH DOWN / UP keys on your remote to get ready to select one
one by one.
3 Press the CH DOWN / UP button on the remote control to select a reversible
one by one.
4 Use Volume Up / Down keys on the remote control, data can be changed.
5 Summary JA JA 137 & 138 for 1 second and release to switch to normal mode (OFF)
position in the microprocessor and the service mode
* * *



عدل سابقا من قبل أشرف عثمان في الأربعاء يوليو 20, 2011 12:45 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس شامل أجهزة service-mode-HITACHI   الأربعاء يوليو 20, 2011 12:30 am

HITAHCI C25 \ 28P445VT, C21 \ 25 \ 28P745VT, C28P405VT (DIGIT2000)
HITACHI
: (P) (*) (O / V) (#) (M).
Exit: TV
HITAHCI 43FDX, 53FDX. Open the front cover panel by removing two screws on each
side. Remove the center panel (six screws). Press the blue button in the left corner of the board.
EXIT: Click on the blue button again.
* * *
HITACHI C2135MN.
entry into the service menu, including a TV front panel, while holding
This "-" button. The menu includes a large number of anonymous codes to decode us
so far failed.
* * *
HITAHCI C25/2844TN, C25/2864TN
(Chassis G10). Hold the button VOL + VOL-, enable the network
switch. Under the lid, press the remote button twice • «.. EXIT: POWER OFF
HITAHCI C2575/76/77, C2975/76/77, CL25/29/76, CP25/29/76, C28300TN (chassis A5). Hold
the VOL + and VOL-, turn on the power switch. Press ESC. EXIT: POWER
OFF

* * *
HITACHI C2578FS, C2589FS, CMT2578
CHASSIS V1: The front of the TV, press
button TV \ Video and holding her turn on the TV. Image will appear as shown. HITACHI
After completing all adjustments, press the ENTER button on the remote control (storage) then
MENU button or turn the TV off.
* * *


عدل سابقا من قبل أشرف عثمان في الأربعاء يوليو 20, 2011 12:47 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس شامل أجهزة service-mode-HITACHI   الأربعاء يوليو 20, 2011 12:32 am

HITAHCI CL2894/TANATA, CP2894ATANATP/AN
(Chassis FEATURE STEREO). Include
TV with remote control and immediately call the service mode by pressing the MENU, TV, i. EXIT: POWER
OFF
* * *
HITAHCI CP2133TA/AN, CL2133TA/TN
(Chassis STEREO PLUS). Turn on the TV and once with the remote control
enter the service mode by pressing the i, M, PROGR. Exit: TV
HITAHCI CP2893TAN, CL2995TAN, CL28500TAN (chassis A5WK). Hold on a TV
down the VOL + and VOL-, turn on the power switch. EXIT: POWER OFF
HITAHCI CS2840TA (chassis EUROSTEREO-2). Press -/--, MENU, TV for 1 sec. OUTPUT:
POWER OFF
2

* * *
HITAHCI Fujian FR-14S22, FR-14S40, FR-21S40, FR-21S50, FR-28S50.
Click the button on the remote control
), Click on the TV front panel button and VOL-holding it, press
button.
You will see the word FACTORY. Repeat the combination of pressing buttons. Appears on the screeninscription: B / W BALANCE. The choice of adjustment by the buttons of CH and CH + change
values ​​of VOL-VOL +.
* * *
Apparatus: HITACHI C21RM25.
Microprocessor:
TDA9381PS / № 2/2I1070 HITACHI V3 TH P15HV VCOT 20 20 PHILIPS 2000.
Entering the service menu: - on a television panel push
TV / AV, and holding, the network button to activate.
* * *
TV HITACHI C21-RM27S,
V3AR chassis.
TDA9381PS/N2/2I0745 CB4441 K2J759 fourth line: PHILIPS
2000, PAL, multi-sound, SECAM, Russian menu. Entry into service
Menu: holding the panel''AV''- to include a network key.
* * *
TV Hitachi A5 chassis
Log into the service menu: 1. pressure on the local panel VOL-and VOL + and connect the network.
2. Push the two buttons on the remote control series (made with MAK and, therefore,
I do not know how designated), pressure-sensitive buttons first red
indication appears (indicated by the model), when pressing the second - the service.
small clarification:

  • in the first row in the service, for example, select the option to adjust, and adjust it to the second;
  • of service to go to only if the service menu on the screen and only after ST-BY.
* * *



عدل سابقا من قبل أشرف عثمان في الأربعاء يوليو 20, 2011 12:49 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس شامل أجهزة service-mode-HITACHI   الأربعاء يوليو 20, 2011 12:36 am

TV HITACHI C2556TN2
The device was brought from England, "DK" have to do theirs now
system only. On the front panel buttons (- Volume +) and (- P +) and another button "Menu" button.
Processor: SAA5296GP HIT OSD K9V545 VER1, EPROM: 27C512-VERSIA = 2R,
Memory: 24W16, Sound chip: TDA9800 - TDA9875, video TDA8841 2Y.
Log into the service menu: Menu Buttons cause the main menu, which looks at the positions
first MAIN MENU
second PICTURE
third AUDIO
fourth SOUND MODE
fifth FEATURE
шестое INSTALL
Then simultaneously press the VOL + and VOL - on the local keyboard and
keep it until there are additional positions in the menu.
first MAIN MENU
second PICTURE
third AUDIO
fourth SOUND MODE
fifth FEATURE
шестое INSTALL
седьмое SERVICE
восьмое EXIT SERVICE
HITACHI
Buttons P + and P - the position of SERVICE choose to enter service by pressure VOL + or VOL -.
Log in TUNER submenu. There is a position of DK.
Exit the service menu - click the MENU button and return to the main menu. Elect position EXIT SERVICE.
Specifying the Output button VOL +.
Attention! In the OPTIONS sub-menu is the position of E2 Shipping and E2 FACTORY.
Second - it samoinitsializatsiya. First - this is the average of all
the adjustments in the mode of service. Be careful with these options.
* * *
TV HITACHI: C14/2122T, C1422R, CL2122R, CP14/20/2122R/T ... , Chassis: F4x, F2x, F1x, CPU: SAA5288/90PS.
Table 1 lists the TVs, chassis, and used the types of controllers.
All adjustments, with a service-related treatment, carried out by
typical remote control type FX700 RCHU or FX701 RCHU. Both control
the same location are keys, but the symbol buttons
different (from a single remote button on the symbol in the form of words, the second - in the form of symbols).
Log into the service menu:
1) To activate the service jumper pins 2 and 3
Connector P701 jumper. Jumper must be for the entire time interval adjustment mode, the TV service.

Initialization of EEPROM memory:
After the change to a new EEPROM memory, the microcontroller enters
automatically in its production the initial values ​​of parameters.
This operation continues for a few seconds. If the
every time turn on the TV repeats the process of recording into memory, it may mean that the faulty memory chip.

  • need to click on the button Teletext (UPDATE) see Figure 2

and hold it for as long as the TV into standby mode
do not go (for three seconds). When you connect a secondary TV automatically will be done initialization procedure.
Parameters adjustment mode service:
On the left side of the screen are displayed in hexadecimal code
two numbers. The number of first parameter number indicates more - the actual value of the parameter characterizes it.
Full list of options available, as well as production
initial values ​​for the various diagonal CRT is shown in Table 3.
! After setting,''1A''indicated, there are three parameters follow that instead of numbers letters denote:
Teletext Contrast - Text Mode.
Information (CPU) of the type of Tuner - Ex: 00 - only for UHF, 01 - multiband.
Information (CPU) on the application sockets - AV: 00 - SCART, 01 - SCART input, together with a telephone.
Adjust service:

  • election options buttons P + / - buttons or the remote control on the keyboard panel, SELECT the local.
  • Adjusting the settings buttons VOLUME + / -.
  • Writing to memory at the same time all the settings done button TV remote control.
After saving the on-screen message appears: STORED.

  • Connect button and teletext buttons 0 mode service are used to switch the serial programs.
  • Buttons NORMAL (normalization) in order to value the production of the controlled parameter is used.
Digital buttons 1 ... 8 can be used for

switch individual bits of the value is set (all values ​​in one byte is written).

  • Button 1 for the most significant bit of responsibility. For example,
If the byte value FF displayed the same, then after pressing
button on a byte value to 7F change (in the record, this corresponds to a binary modification to 01,111,111 11,111,111 bytes).

The order of self:
In the case of a defect that can identify the controller,
TV will be automatically switched to standby mode,
a glowing LED flash will be. The observed defect
determined by the number of blinks LEDs (error number), see table 2.

Extra information
Limiting the adjustment range of sound:
This function is disabled or enabled.
For connection to perform the following steps:

  • push the button once see Figure 1
  • using buttons - or + to set the sound level without the presence of any nominee any distortion.
  • At a time when OSD information on the screen again, press the MUTE button on.
The confirmation of the operation that will correct the map on the right side of the scale character volume.
To disable the inclusion of a procedure repeated.
The confirmation of the operation that will surely disappearing character volume on the right side of the scale.

Exit from service: the jumper from the connector to remove P701.

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]


[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
* * *



عدل سابقا من قبل أشرف عثمان في الأربعاء يوليو 20, 2011 12:51 am عدل 1 مرات
الرجوع الى أعلى الصفحة اذهب الى الأسفل
أشرف عثمان
المدير العام
المدير العام


عدد المساهمات : 2369
تاريخ التسجيل : 16/06/2010
العمر : 56

مُساهمةموضوع: رد: سرفس شامل أجهزة service-mode-HITACHI   الأربعاء يوليو 20, 2011 12:38 am

TV HITACHI C2135MN.
Microprocessor control M37212M6-111SP, videoprots TDA8362.
Enter the service mode: with unchecked power button on the toolbar
Hit machine "- VOL", holding it, connect the TV power button.
* * *

الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
سرفس شامل أجهزة service-mode-HITACHI
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
أشرف عثمان للإلكترونيات :: قسم الصيانة - Repair-TV :: أرشيف السرفس -service-mode-
انتقل الى: